stevebbb
-
Posts
460 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by stevebbb
-
-
Where did you buy it from and could I ask how much it cost?
-
The truck and house both look GREAT!
-
Would someone please take a picture of their truck from the rear with a set of 305/50/20 tires? I wondered if the tires stick out beyond the fender wells.
-
When I installed my new pcm, I had to do the relearn. It wouldn't start until I did.
-
I have 305/50/20s on the rear. I like them
I take it you have the stock tires on the front? Does it change the stance to go to a 50 series on the rear with the front being a 55 series?
-
1) Try to start the truck(it should start but die right away)leave the key in the on position for atleast 11 minutes (the security light will remain on for 8-10 of those minutes)....
2) AFTER the 11 minutes the light should have gone out (if not thats ok), now turn the key to the off position for about 30 seconds. Now try to start the truck again and it should start and die right away, Leave key in the on position.
3) Once again w/o turning the key to the off position, Let the truck sit for 11 minutes, after 11 minutes then turn the key to the off position for 30 seconds.
4) Retry again to start truck, it will die again and follow same thing as before for the last time.
After the third time it should start right up. And then you can go test out the new beast
P.S. Make sure to turn headlights off, radio, subs, amps and any other accessories....Since this process takes 30+ minutes your battery may die if you are blasting your radio while trying to be patient
-
I''m not sure if this will fix your problem, but it's pretty common to have to do a relearn procedure when installing a new PCM. I did a search and came up with this from MR. P. Give it a try and let us know.
1) Try to start the truck(it should start but die right away)leave the key in the on position for atleast 11 minutes (the security light will remain on for 8-10 of those minutes)....
2) AFTER the 11 minutes the light should have gone out (if not thats ok), now turn the key to the off position for about 30 seconds. Now try to start the truck again and it should start and die right away, Leave key in the on position.
3) Once again w/o turning the key to the off position, Let the truck sit for 11 minutes, after 11 minutes then turn the key to the off position for 30 seconds.
4) Retry again to start truck, it will die again and follow same thing as before for the last time.
After the third time it should start right up. And then you can go test out the new beast
P.S. Make sure to turn headlights off, radio, subs, amps and any other accessories....Since this process takes 30+ minutes your battery may die if you are blasting your radio while trying to be patient
Goo luck!
-
Price sounds too good to be true.
-
-
Could you give the part number for the strip that runs under the tailgate? Does it come painted? I need a red one.
-
How long is the warranty for and what does it cover?
-
The part number for the small one, 2.75 x 1/2 is 15826444.
-
I never have to log in.
-
-
Congratulations on the new truck, great choice. Welcome to the site, I think you will like it here.
-
A very Happy Birthday to you Kim. Have a great day!
-
I have to agree, with miles that low, the price sounds about right. Of course, make a lower offer first, all they can do is say no. Good Luck.
-
The fastback 2 has been discontinued, but there might be some dealers out there with leftover inventory.
-
I have had 2 PCMforless tunes, and 100% happy both times.
-
-
Congratulations on the new truck and welcome to the site!
-
Looks GREAT!! I really like the exhaust system.
-
Welcome Newb!
-
I have looked at them all and this is the one I want. If you have one, where did you buy it and are you happy with the seller?
Shopman Bowtie
in Vendor/Member Praise/Complaints
Posted
I worked in a machine shop for several years and I can tell you, there is a lot of work making these. I'm very happy with mine.