moregrip
-
Posts
684 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by moregrip
-
-
this one is a wrap, just need to wire it up and run the cooling lines, I am very pleased with the way this project turned out as far as fitment is concerned; hopefully I'll realize low IAT's for my efforts, LOL, but you know how that shit goes
. Ended up being fairly cost effective in the end as well 
, enjoy the pics, let me know what you think :usa:
-
dammit! why didn't you show me this at the GTG?
-
here's the latest project almost complete.......I had the two truck heat exchangers I was running welded together at approx the lower bumper bracket mounting angle; then had some L-brackets I fabbed up welded on the rear H/E so a pair of small e-fans could be bolted up. I think I am going to run these H/E'ers in parallel and see how that works out as far as IAT's are concerned. This dual setup will be mounted ala' Joe gibbs brackets behind the front bumper.
I drilled holes in the center of the L-brackets so they could be zapped for a little extra support:
puller E-Fans staged, but not mounted yet:
-
did you guys go to that texas lucy's?
if so any pics? 
lolI would have liked a cruise, but I was truckless
and a little tired, next time for sure 
-
it was a great meeting you moregrip
you to brother
-
-
rise and shine
-
see you guys bright and early!
-
lookin forward to meeting all you guys! drive safe!
-
updated list! 2 days!
-
list updated! so far we are going to have an excellent turnout!
-
I'm not exactly sure how many I can save, don't want to be rude, the parking lot is large and there is plenty of room. I will be there 6:30-6:45am-ish
-
-
2 weeks to go! make sure you sign up if your going to make it out
everyone is welcome to stop by!
-
more grip thanks...
ash06gto's plan for that texas loosy's place sounds great!... i just got pictures of a whole bunch of daisy dukes walking around the place serving food in lil bikini's
;)LOL, I didn't know Texas Loosey's was still around! good deal!
-
i know this is a dumb question but by carting your reffering to go carting right?... if so what kind and how much for the rentals?. thanks
starts at post 32
-
hey moregrip,
what time doe's the show end and the other stuff begin?...
dumb question, too lazy to look on the calender..i might actualy make it there the day before and stay the weekend?... still have some plannin to do.
if anyone wants to do the same i might be able to get you a break on the prices at my resort in carlsbad?... have to check but i think i could.
if i don't go the day before, i'll meet up with you guys then.
7-9am is what the exotics usually show up for, not that we can't stay longer, I've seen several side bars on what to do afterwards but nothing concrete yet
-
from the 15/91 interchange i think it will be about an hour and 15 to an hour and a half so that should be about right. hey grip can save a few spots for us out of towners?
and damit get that truck running.
you know I will, save the spaces that is!
-
Dave, we should see who we can get up here to roll down with us. I'm thinking we'll have to leave ballz early but we could probably pick up a few people along the way too! My ex gf lives down there too, I think I might go egg her house!! Lol
Chase Gas lamp sounds good as long as your driving!
for you guys making the drive, leave early! I've made the drive to Calabasas before, but I hate traffic! If you leave by 0530/545 you should be good to go for a 7am-ish arrival
-
count me in! i just need a confirmation this is on the 25th (i heard it was on the 29th) so i can plan ahead
yes saturday the 25th it is! the 29th is a wed
-
grip when is roll in?? i know there will be a few of us so it would be nice to get a good spot were we can all park next to each other.
and since its on saturday , anybody down to go down to the gas lamp district afterwards for some grub??
7am, I'll be there earlier with Joe. There are a few guys setting up some carting afterwards and a cruise, fun stuff!
-
it's a problem caused by the sharp leading edge of the TB flange on the J-Tube when running a CAI (doesn't happen with stock installs as the system is designed for) . A little rounding of this edge will take it away. The inner ridge on the J-Tube sounds like a possibility as well, but I would start with whats easy
-
do you really think the stock motor will handle it?!? I would be very surprised... unless you run a huge pulley...
Im not trying it first!! lol... i pretty much have enough with my 112 for now...
BTW - that thing is beautiful... OMG... how soon till it is done, the build?
VIDEO IS MANDATORY!
any ideas on numbers?
if your set on the 112, at least get the high helix rotors, that will be good for a few more ponies
-
Oh my! That's purdy! I am very very jealous.
I have 1,600 saved, and I just payed off my motorcycle, so I can start saving that payment each month. Oh, and I sold my '83 Chevy, so that saves me 50 a month for insurance. I should have the cash saved in no time.
Is the 122 for stock apps, or should I get the 112 for stock? Also, should I make sure to get the "H" kit, or does it really matter.
Mike
at this point I'd just get the 122H and be done with it
Magnuson MP122H Truck system inside
in Forced Induction and Nitrous
Posted
the BLOWER is officially Bench Assembled!!!