BlkSilvySS

Hey guys, I was wondering if anyone has the black projector headlamps, and black bumper lamps? If so could you post a pice, pref. of a black truck. Also does anyone know of the bumper lights being made with a black mirrored reflector? That's the one thing holding me back, I might just be the black oe styled headlights to run HID's in as well. So if you have them installed, post pics as well too if you have them with the black bumper lamps. Has anyone tried to take their OEM bumper housing apart, and "tint" the reflector?

Hey guys, I am lookin at getting an exhaust system for my Birthday coming up (August 16th). However I'm stuck in the mud. I have went to websites to listen to clips. Definately dissappointed in the Magnaflow sounds, the new body style Silverado with a 4.8/5.3 sounds mean, however our SS clips sound wussified like no other!! So I'm lookin at MagnaFlow, or Flowmaster's kit. The Flowmaster kit has a 50 Series Big Block muffler in it. I'm keeping the stock side exit location, but going to get a chrome styled tip, possibly like the Corsa tip. Any insight would be greatly appeciated! Also sound clips would also be nice, if they aren't of a heavily mod'd truck. Batman out.......

pppssst....Experts this is your que..... QUE THE EXPERTS

Hey guys, I am lookin to jump on some rims. I'm looking at these Foose DF 6 in black, but the only offsets in 22" x 9.5" are, 20mm and 28mm. Any Input, the tires I'm look at for those rims are...BF Goodrich TA KD/W in a 295/45-22 size tire. All help would be appreciated thanks!! Our bolt pattern is 6/139.7?

It's the gray right? Still avail, I didn't see a confirmation post on the sale pending...

Hey buddy I would trade ya mine, but it's smoked... Do you have pics of this light installed on your truck, possibly at night too?

Well what's the status? What the difference in the 15153 and this??

If you have an HVLP, or want it done with Automotive products. I've done 3 sets locally, and have a formula that I go by depending on how dark you want them... Let me know if you still haven't worked on yours yet...

I have the 2500* carbon ones on my LS1 Firehawk with the Stage 8 Locking Header Bolts

My Rollpan has a rectangle already routed out, just smaller than the license plate, but now the stockers still won't work. As far as the crank mech. assy. goes. SirMichaels says if I run a hidden hitch on the shortbed, I will need to downsize the spare...

Hahah, good one R8. Wody, no gear wrench. Box end wont fit good, just using the open end, over, and over, and over, did I mention and over again?

Hey guys, I got it to work. Using the 12mm all the way up, I guess I just need to keep the 122mm in the jack bag lol. Anyhow, if someone has modified the stock setup to work. Please still fill me in. Anyways I have the spare under the truck. However I would DEFINATELY need to downsize the spare in order for me to put a hidden hitch on which is more than likely the next order of business.

Hey guys, HELP!! I'm outside installing my SirMichaels Spare Tire relocator. I have a BSER Rollpan. My question is, obviously the rollpan doesn't have the access hole that the bumper did, to utilize the factory crank mechanism. So I am trying to put the spare tire up, and have cranked as far as I could by hand, (using a 12mm wrench to turn the square drive) but now I'm too the point where I can't do it anymore. I was wondering what you guys have done to correct this issue, if anything? I can't really keep the spare tire in the bed of the truck, as I haul bikes around racing. Which is why I have came to this point of getting the Spare Tire relocator. So please HELP me out if anyone knows the trick.

Hey guys, Those of you who have a BSER Rollpan, that have the SirMichaels spare tire relocator. I need to know a few things. If you can IM me on AIM it would be sweet!! MxRacer476 is the name. I would start a new thread, but for some reason now it's sayin I don't have permission to do so, even though I have in the past?!?! lol

PM Sent

Kelly what is the part number for BEL-1203, that is the 2/2 with spindles from Beltech, they also told me the shocks I need pn's for the Drop 2's are 8521, & 8504

Does anyone know if the Beltech 2/2 AWD Kit is instock anywhere? I had one on order since November through Summit Racing, it had been on backorder continually getting pushed further and further out. Beltech is supposedly on on a shortage of the NitroDrop shocks to fullfill orders, which is why I hadn't recieved mine. So I cancelled mid Feb probably. If anyone has one they wanna sell personally NEW then let me know as well....Didn't really know which forum to put this in Supension, or For Sale/Wanted, but if the mods thinks it should be in the other, feel free to move it!! BEL-103 I belive was the part number...

I raced these bikes last year, whoever is interest don't hesitate the aluminum frames ROCK

Cmon pics already

Well after waiting on Summit lying over and over and over again to me. Even putting me on a "3 way call" with BelTech sayin my order has been shipped for the past month. Now they are sayin Summit wont stock it till middle of March. Even tho 2 weeks ago the 3way call said they full filled the order that day and would ship it the next. None the less this kit has been on order since NOVEMBER!!! So if anyone has one new just layin around let me know please...As well as let me know what you want for it

I have a factory BLACK OEM Grill as well make an offer

It does the same thing to me also. I wonder if it is a pay feature of the site or I am using Mozilla as a browser. I will try explorer and see if that helps. I'm usin IE7 and it does it to me, so who knows...If it is a pay thing, I wish someone would let me know

Why is it every time I click on a link to a pic it says, "Sorry, an error occurred. If you are unsure on how to use a feature, or don't know why you got this error message, try looking through the help files for more information."

Ouuuch, anxious to see what you come up with for the new complete setup...Sorry it happened, but now you can go the route you really want...