eppieguy Posted April 18, 2005 Report Share Posted April 18, 2005 At around 100 MPH my centercaps on my wheels tend to spin on my wheels. When I get out of the truck the caps aren't lined up with the wheel anymore. Anybody else have this problem and if so is there a fix? Thanks! Link to comment Share on other sites More sharing options...
IdriveGTP Posted April 18, 2005 Report Share Posted April 18, 2005 Mine have never gotten loose, but I can tell you that in the past 2 weeks I have had 3 of the center caps replaced for pitting....and the new ones are REALLY TIGHT! My old ones were what I would call secure, but these new ones take some pressure to get on! Link to comment Share on other sites More sharing options...
fox_forma Posted April 18, 2005 Report Share Posted April 18, 2005 I doubt its your speed making them turn a little. Mine have done it a little also but my guess is its just the vibrations and the bumps causing it to get off center some. Link to comment Share on other sites More sharing options...
Maximus Posted April 18, 2005 Report Share Posted April 18, 2005 I have the same problem with my front two!! Link to comment Share on other sites More sharing options...
m396 #00-011 Posted April 18, 2005 Report Share Posted April 18, 2005 The caps are keyed to fit on the wheel only one way correctly. Make sure the key and keyhole is lined up when you install them. Link to comment Share on other sites More sharing options...
misterp Posted April 19, 2005 Report Share Posted April 19, 2005 ?! I can't see how it would be possible that they are so loose, the ones on my truck are like IdriveGTP, super tight, can't get them off without tools and special precaution to avoid marring the rims. Link to comment Share on other sites More sharing options...
eppieguy Posted April 19, 2005 Author Report Share Posted April 19, 2005 Guess it's just my bad luck!!! Thanks for the info guys, much appreciated Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.