elitesurfer50 Posted January 15, 2006 Report Share Posted January 15, 2006 on the beltech rear shackles that i got theres many differnt holes were i can bolt the leafs on. what hole do i use for the 2 in drop? the box says its for a 1-3 drop theres like 5 different settings your can bolt them up 2.. so i dont know what one to do it at... Link to comment Share on other sites More sharing options...
AUTOGUY Posted January 15, 2006 Report Share Posted January 15, 2006 The Middle ones? Link to comment Share on other sites More sharing options...
fordsareslow Posted January 19, 2006 Report Share Posted January 19, 2006 I didn't know they were for 1-3" drop, mine just said 1-2" drop. I thought anything more than a 2" shackle, and it would hit the bed floor. But on my beltech shackles, I used the top hole to get 2" Link to comment Share on other sites More sharing options...
W2W402 Posted January 20, 2006 Report Share Posted January 20, 2006 I have the same set up. I used the top hole for 2 inches, but my truck is an 05 AWD. Might be different if you have 2WD. Link to comment Share on other sites More sharing options...
KoreySS Posted January 20, 2006 Report Share Posted January 20, 2006 I didn't know they were for 1-3" drop, mine just said 1-2" drop. I thought anything more than a 2" shackle, and it would hit the bed floor. But on my beltech shackles, I used the top hole to get 2" <{POST_SNAPBACK}> I used the top holes for mine, any higher and I think it "Would" hit the bed floor! Korey Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.