jbrim Posted December 15, 2003 Report Share Posted December 15, 2003 Can anyone help me out? Step # 52 on the installation of a magna radix says " Using new supplied 16"x 3/8" (pcv) vacuum hose, connect one end to the (pcv) valve as shown, and lay the other end of the hose off to the drivers side out of the way. ( To be connected in a later step). I've installed the new supplied hose in the valve as shown but never found a later step in the instructions as to where to connect. If anyone can shed some light on this, I would be most appreciative. Thanks. Link to comment Share on other sites More sharing options...
BenKey Posted December 15, 2003 Report Share Posted December 15, 2003 Without looking at my manual, it should be connected to the barbed connection you should now have at the bottom side of the intake tube a couple of inches out from the throttle body. There is a hole there now to install the barbed connection. Link to comment Share on other sites More sharing options...
jbrim Posted December 15, 2003 Author Report Share Posted December 15, 2003 The pcv hose in this step is the one that comes from the back drivers side of the enginge. It's not the little one that comes off from under the throttle body that connects into the new TB adapter. Link to comment Share on other sites More sharing options...
slimsoftball Posted December 15, 2003 Report Share Posted December 15, 2003 Look at the belt routing sticker that comes with the Radix, it is on there. I am not near my truck right now or I would go look at it myself. Link to comment Share on other sites More sharing options...
BenKey Posted December 15, 2003 Report Share Posted December 15, 2003 Alright, sorry for getting back to this so late. You should have two hoses coming off the back of the s-chgr. If you are looking at from the front of the truck, the right goes to the vacuum asst. brakes, the left one goes to your location - the pcv valve. Link to comment Share on other sites More sharing options...
jbrim Posted December 15, 2003 Author Report Share Posted December 15, 2003 Thanks guys, I couldn't find that in the structions and I wasn't about to start guessing. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.