Vortec MAX Posted November 13, 2007 Report Share Posted November 13, 2007 Iam curious,Was the dyno done on a dyno jet? All i can say is that a 1/4 mile pass will show your real time. Or a couple of dyno pulls on my mustang dyno. I don't think Mustang dynos are kind. That's the kind I ran on when I first got my truck. It was a "loaded" dyno, so it was very hard to get up to speed. It only gave me 289 HP and 320 ft-lb with a tune and K&N drop in. The tune was just installed while it was strapped down, so it didn't have much time to level out before the pulls. I think the Dyno Jet dynos give higher numbers. Mike Quote Link to comment Share on other sites More sharing options...
smkdu Posted November 13, 2007 Author Report Share Posted November 13, 2007 Now that's a loaded question if I've ever seen one Okay let me rephrase the questions what would be the closest to where i live and make me happy with the tune and not cost the arm and a leg that i pay for gas Quote Link to comment Share on other sites More sharing options...
.justin. Posted November 13, 2007 Report Share Posted November 13, 2007 Okay let me rephrase the questions what would be the closest to where i live and make me happy with the tune and not cost the arm and a leg that i pay for gas Where do you live? Quote Link to comment Share on other sites More sharing options...
smkdu Posted November 13, 2007 Author Report Share Posted November 13, 2007 Where do you live? Maine Quote Link to comment Share on other sites More sharing options...
Fireman31 Posted November 13, 2007 Report Share Posted November 13, 2007 I don't think Mustang dynos are kind. I don't know Mike, mine was just run on a Mustang dyno and look at the numbers I got, very very strong. Granted the numbers put down on a Mustang are more "real-world" type, that tells me what kind of an animal i'm driving every day. I guess that not every motor is the same from the factory. Quote Link to comment Share on other sites More sharing options...
Holty Posted November 13, 2007 Report Share Posted November 13, 2007 Okay let me rephrase the questions what would be the closest to where i live and make me happy with the tune and not cost the arm and a leg that i pay for gas http://www.silveradoss.com/forums/index.php?showtopic=27002 Quote Link to comment Share on other sites More sharing options...
collingdale Posted November 13, 2007 Report Share Posted November 13, 2007 http://www.silveradoss.com/forums/index.php?showtopic=27002 Those some good and true numbers on mustang dyno .The dyno jet gives higher number as they are inertia dynos the majority. Mustangs dynos are eddy current. The important thing is that the customer is happy! Could you get more out of it? YES IS THE ANSWER. Quote Link to comment Share on other sites More sharing options...
smkdu Posted November 16, 2007 Author Report Share Posted November 16, 2007 Does anybody do tuning closer to maine or am I gonna have to send out my pcm for tuning Quote Link to comment Share on other sites More sharing options...
Fireman31 Posted November 16, 2007 Report Share Posted November 16, 2007 Does anybody do tuning closer to maine or am I gonna have to send out my pcm for tuning get a hold of JF-03-SS, I think he had someone dyno tune his somehwere up there Quote Link to comment Share on other sites More sharing options...
smkdu Posted November 16, 2007 Author Report Share Posted November 16, 2007 get a hold of JF-03-SS, I think he had someone dyno tune his somehwere up there Thank for the info bro Quote Link to comment Share on other sites More sharing options...
Vortec MAX Posted November 16, 2007 Report Share Posted November 16, 2007 (edited) I don't know Mike, mine was just run on a Mustang dyno and look at the numbers I got, very very strong. Granted the numbers put down on a Mustang are more "real-world" type, that tells me what kind of an animal i'm driving every day. I guess that not every motor is the same from the factory. Well, your numbers of 314rwhp and 360rwtq are certainly excellent! When I ran 289/320 the truck was pretty new, and that was just a K&N drop in and a mild tune. Also, the run was right after I put in the tuned PCM (I did a before and after), so it did not have sufficient time to level out the fuel trims etc. Since then I have added all the stuff in my sig and a more aggressive tune. I can feel the difference, but I have not dynoed again since the mods. Hopefully, I am about where you are at. Mike Edited November 16, 2007 by Vortec MAX (see edit history) Quote Link to comment Share on other sites More sharing options...
Fireman31 Posted November 16, 2007 Report Share Posted November 16, 2007 Well, your numbers of 314rwhp and 360rwtq are certainly excellent! When I ran 289/320 the truck was pretty new, and that was just a K&N drop in and a mild tune. Also, the run was right after I put in the tuned PCM (I did a before and after), so it did not have sufficient time to level out the fuel trims etc. Since then I have added all the stuff in my sig and a more aggressive tune. I can feel the difference, but I have not dynoed again since the mods. Hopefully, I am about where you are at. Mike yeah you'll probably have much better numbers now with more mods and a motor that is fully broken in, keep me posted on the topic....... Quote Link to comment Share on other sites More sharing options...
smkdu Posted November 21, 2007 Author Report Share Posted November 21, 2007 (edited) I found that 383 Vortec Stroker "kit" or should I say I highjacked the plans for the crate Vortec 383 the Stage II has 380HP and 470ft/lbs I'll have to buy the compents individually but at least now I know that it exist and can make some serious power. The Stage I has 325HP and 400ft/lbs but for the extra couple hundred why not get the Stage II Edited November 21, 2007 by smkdu (see edit history) Quote Link to comment Share on other sites More sharing options...
JF-03-SS Posted November 21, 2007 Report Share Posted November 21, 2007 get a hold of JF-03-SS, I think he had someone dyno tune his somehwere up there Quote Link to comment Share on other sites More sharing options...
sstruck383 Posted November 28, 2007 Report Share Posted November 28, 2007 (edited) Yea I have a friend with a 1997 Supercharged 5.7L Z71 and it made 292rwhp/400 ft lbs on a Dyno dynamics so you have a freak. The 350HO came with 330hp and 380 ft lbs of torque by the way. . Edited November 28, 2007 by sstruck383 (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.