Rick_Vor Posted June 21, 2008 Report Share Posted June 21, 2008 I sold my Procharger system so I no longer need this custome intake set-up. This system is made off 4" aluminum and steel piping, extra heavy duty exhaust wrap to keep out the heat and rubber elbows. Most of the piping is 4" round aluminum but the piece over the intake is 4" steel and slightly "ovaled" for hood clearance. It has a port at the head unit for the bypass valve tubing (just like a stock P-1SC Air filter) and another port to hookup the pcv tubing right at above the intake manifold. With this system, I maintained AIT's at about 3-7 degrees above ambient, even after a full pass. I lost about a 1/2 pound of boost with this system over the original P-1SC air filter but it also really quieted down the air intake noise. I spent about $250 on all the pieces to build it so I would like to get $125 plus shipping. I am located in the San Francisico Bay Area. Thanks, Rick Quote Link to comment Share on other sites More sharing options...
Rick_Vor Posted June 29, 2008 Author Report Share Posted June 29, 2008 Sold to FireSS. Thanks! Rick Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.