Jspeeddemon Posted May 16, 2004 Report Share Posted May 16, 2004 I was modifying my thermostat and forgot to hook my MAF sensor up when I started my SS. Now I have a check engine light. Can I clear the code some way, like my ZO6, holding options and fuel button and then reset will clear the codes. Link to comment Share on other sites More sharing options...
dcairns Posted May 16, 2004 Report Share Posted May 16, 2004 Takes a gizmo to clear the codes. Some auto parts stores, like AutoZone will clear them for you. Link to comment Share on other sites More sharing options...
BenKey Posted May 16, 2004 Report Share Posted May 16, 2004 They will go away on their own also. I think it's after three successful times running without the code, it'll go away. I occassionally get the misfire code associated with bigger cams and they go away. Link to comment Share on other sites More sharing options...
zippy Posted May 16, 2004 Report Share Posted May 16, 2004 ben's right, you're better off just driving it. if the code doesn't go away, it isn't fixed. Link to comment Share on other sites More sharing options...
Jspeeddemon Posted May 17, 2004 Author Report Share Posted May 17, 2004 Thanks for the replies fellas, the code finally cleared itself after several starts and or running for a while. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.