ChevyMan23 Posted April 9, 2010 Report Share Posted April 9, 2010 I plan on lowering my RCSB 2 inches in the front, and 2 more in the rear, as I already have shackles. What are your all's opinions on DJM? Stylin is having a pretty decent sale this month on all DJM parts, and I wanted to see the pro's and con's. TIA. Quote Link to comment Share on other sites More sharing options...
[email protected] Posted April 9, 2010 Report Share Posted April 9, 2010 I like them. Excellent customer service. Product is good quality. I have lowering control arm which have urethane bushings. The bushings give a better ride but can "squeak" but DJM do have grease nipples to lube the bushings to help. Quote Link to comment Share on other sites More sharing options...
SSplaytoy Posted April 10, 2010 Report Share Posted April 10, 2010 Contact Norcal SS and he will beat those sale prices and give you more info. DJM makes good products and I actually plan on adding the 3" drop LCA's to my spindles. Quote Link to comment Share on other sites More sharing options...
NORCAL SS Posted April 11, 2010 Report Share Posted April 11, 2010 the main thing with djm squeak is prep 1) use brake cleaner on all parts its going to touch on the frame and clean very well 2) they supply grease make sure to put that great on the frame points and on the bushings 3) when putting in leave the bolt loose and just pump greast till you just see it squirt out of bushing hole 4) then tighten it all up you should have no squeak ive been doing this since 95 on all silverados i lower no probs. Quote Link to comment Share on other sites More sharing options...
ChevyMan23 Posted April 11, 2010 Author Report Share Posted April 11, 2010 I am only doing drop springs, and hangers and new shackles I guess. Squeaking shouldnt be an issue here. Quote Link to comment Share on other sites More sharing options...
NORCAL SS Posted April 11, 2010 Report Share Posted April 11, 2010 I am only doing drop springs, and hangers and new shackles I guess. Squeaking shouldnt be an issue here. yah 2/4 is no prob then. Quote Link to comment Share on other sites More sharing options...
[email protected] Posted April 12, 2010 Report Share Posted April 12, 2010 the main thing with djm squeak is prep 1) use brake cleaner on all parts its going to touch on the frame and clean very well 2) they supply grease make sure to put that great on the frame points and on the bushings 3) when putting in leave the bolt loose and just pump greast till you just see it squirt out of bushing hole 4) then tighten it all up you should have no squeak ive been doing this since 95 on all silverados i lower no probs. Thanks for the advice. Quote Link to comment Share on other sites More sharing options...
NORCAL SS Posted April 12, 2010 Report Share Posted April 12, 2010 Thanks for the advice. no problem ive sold/installed well over 400 of these kits over the past 10 plus years Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.