03BlkSS86 Posted December 20, 2010 Report Share Posted December 20, 2010 I went out to start the truck on sunday, didnt watch the guages when I started it. Got back in about 10 mins later an nothing was working. This has only happened to me once. I just shut the truck off an started it back up and it seems to work fine. Has this happened to anyone else? Quote Link to comment Share on other sites More sharing options...
03BlkSS86 Posted December 20, 2010 Author Report Share Posted December 20, 2010 to clarify, The tach, speedo, gas, tranny temp, engine temp, volts and oil pressure wasnt working. Nothing but the truck was running. Quote Link to comment Share on other sites More sharing options...
SSplaytoy Posted December 21, 2010 Report Share Posted December 21, 2010 Pull the dash bezel off and remove the cluster to check and see if the plug is loose or if a wire is pinched or nicked. Quote Link to comment Share on other sites More sharing options...
scootertrash19 Posted December 21, 2010 Report Share Posted December 21, 2010 Had this same problem two weeks ago, shut it off and restarted, cranked over pretty slow the first and second time, but gauges started operating properly, check the battery, had a dead cell, replaced battery and have had no problems, at least for the last two weeks. Quote Link to comment Share on other sites More sharing options...
70chevy03ss Posted December 21, 2010 Report Share Posted December 21, 2010 Same thing happened to me. Just unplug the battery for a few and plug back in. All done!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.