FS: Nitrous and Nitrous Accessories!

[Krambo]

Taking the nitrous off the truck! Figured I will see if there is any interest here first before I go to a broader market. Everything is still installed on the truck so shipping will not be instant. Feel free to PM and I can give you a ship date. All prices INCLUDE shipping unless noted. Best offers will be entertained however keep in mind this is the first place I put them up and may not jump until they have had exposure on other sites. Thanks for looking!

 

 

1. Dedicated fuel system - including 1 gal aluminum fuel cell (anodized red), Walbro fuel pump, Aeromotive adjustable FPR (includes both High and Low pressure spring), -6AN lines / fittings and fuel line, Fuel Pressure Gauge, -6AN billet in-line fuel filter (serviceable) and FPSS (low pressure). Also includes the aux. battery tray so that it can be mounted in the location in the following picture.

 

S O L D (but still have the battery tray!)

 

 

2. Trick performance P-gauge - NEW IN BOX. This gauge does everything. P is the only gauge in the world that is a progressive controller with mutli-point ramping capabilities. Its computer processor controls the nitrous system completely including the heater. It is the world's first and only gauge that is completely graphical and digital, with state of the art computer screen display. Its fully programmable system can work on any single stage nitrous system. You simply program the unit to your nitrous system. P is not just a gauge, it is a controller as well. P controls the heater, shuts the nitrous system down; if you are running lean or low on nitrous or fuel pressure, progressive controller, window switch, TPAS switch, nitrous pressure gauge, shift light. A warning flash will let you know you have a problem and where that problem is. P will dispaly, your(nitrous, boost, fuel, or oil pressure), O2 reading, is the heater on or off, nitrous progressive level, rpm, inside or outside the window switch setting, wot activation. The full color graphic display allows you to control and monitor your nitrous system with just a quick glance at the face. You have 8 main viewing screens to choose from, with just a push of the control button. Fits any 2 1/16 gauge pod.

• Progressive controller (time or rpm based)

• RPM window switch

• Wide-Open-Throttle detection when used with factory TPS or WOT switch.

• Supports Fly-by-Wire TPS rising or falling

• 5 Point variable Progressive ramping (time or rpm based)

• Shift Light

• Rich l Lean Cutoff (when used with a wideband)

• Air/Fuel inputs Digital or Analog

• Multiple wideband capabilities

• Heater controller

• First gear lockout / delay

• 8 different Main Viewing screens.

• Programmable Power UP screen and Arm screen

• Multiple pressure choices

• Pressure display ( Boost, Nitrous, Oil or Fuel)

 

Here is a good link with pictures of the gauge in action:

 

http://www.nitrouste...hread.php?t=309

 

S O L D

 

3. Nitrous Outlet Remote Bottle Opener. MINT condition, used less than 5 times. Comes with about 15ft of high quality wire/loom. Link: http://nitrousoutlet...y=23&section=77

 

$200.00 SHIPPED

 

4. Full Dry Kit with all bells and whistles. Includes - 10lb nitrous bottle (FULL if picked up locally), nitrous solenoid, 4 jets (50, 75, 100, 150 shot), full purge kit, 150 watt bottle heater, integrated bottle pressure gauge, NHRA blow-off valve with rupture disk, K&N cone style filter with nozzle mounted, -4AN stainless braided main nitrous feed (roughly 15 feet), -4AN nitrous filter, Trick performance / Nitrous Outlet controller (window switch, gear lock-out, throttle switch, 2 stage etc.), relays for bottle heater and nitrous solenoid, switches, install instructions, user manuals and most of the wiring (should be able to save all of it).

 

Can be made into a wet kit VERY easily and inexpensively with the addition of a fuel solenoid (and necessary fittings) and a nozzel!

 

Radix guys - this set-up was made for you!

 

SALE PENDING

 

 

5. Twin bottle billet quick release adjustable mounting bracket. Includes mounting hardware. LINK:

 

http://nitrousoutlet...29&product=3462

 

$200.00 SHIPPED

 

 

 

6. Nitrous Outlet Purge kit.

 

S O L D

 

7. FULL 10lb Nitrous bottle with integrated bottle pressure gauge, NHRA blow-off valve with rupture disk $125.00 Local, empty if shipped - $100.00

 

8. Switch Panel - Includes 2 "on-off" switches with LED indicators, momentary 2 position rocker switch (for remote bottle opener) and a purge button. Includes steel switch plate cut to fit our unused pocket on the left dash and ALL wiring with multiple resistors installed to prevent LED burn-out. This is NOT a sloppy wire package. High quality wire and connectors used with PLENTY of slack to complete your project. $100.00 SHIPPED

 

9. 15ft -4AN stainless braided nitrous line, black fittings $45.00 SHIPPED

 

10. FAST 92mm intake with custom bent direct port nitrous system. Can flow 400HP. Full array of jets (to support 100, 140, 200, 250, 300 HP). custom airbrushed. Does not include rails and injectors (but it can!) $1900.00 SHIPPED

 

Just the DP system (no intake) with all of the jets (roughly 50 jets) - $750.00 shipped

 

 

Pictures:

 

 

 

 

 

Edited July 18, 2012 by Krambo
Update sale status (see edit history)

[EmoWalrus05]

looks like a fun system to me GLWTS

[The_aSSet]

Ill take the purge kit, got a Paypal or something?

Edited July 9, 2012 by The_aSSet (see edit history)

[Mr.Scary]

i dig those fuel rails..

[Krambo]

Updated first post....BUMP!

 

Entertaining best offers...throw one my way, you never know!