Jump to content

Nscott

Member
  • Posts

    559
  • Joined

  • Last visited

Everything posted by Nscott

  1. I need one!!!! One stock silver 20", let me know what you got, no beat up ones please Thanks, Neil
  2. just cut mine out, and i'm running dual glasspacks too..... loud as hell.....
  3. Didn't know their was one? let me know, hopefully i can swing by
  4. Same shit just happend to me, just waiting for the battery on the saws-all to recharge to get the other cat out, driver side was pretty badly clogged, passenger side is still yet to be seen.... waiting for my computer to come back from wheatley and i'll be all set! must be the air here... I'm from stamford, ct
  5. Nscott

    P0101, P0300?

    It was driven for about 20 minns to get somewhere safe... should be fine? no? It was 11:30 pm when i started and i was leaving a 8:00 am with my girlfriend for vacation... just my luck! got it to my buddies house and started trying the figure shit out until 2:30 am... got a ride home, over slept my alarm clock and had to pack in the morning... my truck is replaced by her jeep liberty for the 3 hour ride! I'll be dealing with this when i get back home after the weekend! My thoughts, most cost effective way for now would be to punch out the cats, and get my ecu tuned for having no rear o2 sensors... any thoughts on that?
  6. Nscott

    P0101, P0300?

    yeah man, it was flashing, i'm pretty sure it's the cat cause MAF is clean as hell. I'm hearing build up in the exhaust on the drive side manifold, like the exhaust is struggling to get out...
  7. I had a rattle in my exhaust.... now i'm throwing p0101 and p0300 codes, i think it's my cats... trans wouldn't shift right, put the motor into limp mode at first... not firing right. lets hear some opinions! thanks, Neil
  8. I had it off on the lift yesterday down at aamco... they were soo puzzled by this noise.... turns out after three or four guys with stethoscope listening, I blew part of my catalytic conv apart and it's sitting in the mid pipe that cross's under the trans and is rattling around.. haha, Time to get headers!
  9. Just recently started.... upon cold starts i get steady knocking noise coming from the trans and increase with rpm (not speed)... but when the truck warms up, it'll go away, fluid levels are good, could use some fresh fluid soon... Any suggestions on what to look for? bone stock trans, 55K on it.
  10. Bumo for you, same here i need some too! can't find them anywhere
  11. 54,xxx miles... custom tune, volant w/ram air, dual glass packs, mobile 1 every 3K, 22's, tint on every window... I'll take 17k
  12. Thanks man! gotta see if my body shop will cover me on that money. calling them up first thing in the morning!
  13. Tell me what you got!? Preferably black! Thanks, Neil
  14. Hey, I'm looking for a stock driver side pillar, I know someone has to have one! Let me know what you have! Neil
  15. I'll take it! Let me know how you want payment! Thanks, Neil
  16. I Have a 95 suburban i'm parting out. 350 motor tbi 4l60 trans (slips when warm, we think previous owner put motor oil in it) Np20 IFS front end 10 bolt with factory locker ( i believe eaton) Full interior, gray pleather seats All glass is good except windshield So far it's complete but we're pulling parts as the days go by. P.m. or email me with your needs, [email protected] Thanks, Neil
×
×
  • Create New...