The_aSSet
-
Posts
3,570 -
Joined
-
Last visited
-
Days Won
12
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by The_aSSet
-
-
-
Sounds pretty good, id port and polish those heads or get some trick flows. What kind of valves, rockers, and springs?
-
Paid! Thanks Shawn!
-
Under the dash next to brake pedal in the kick pad area. Has a nut fastening it in the center.
Didn't find anything in there, looked like all bcm stuff.
Looking through my Chilton manual it says that pin goes to that fuse but then doesn't go anywhere after that? Ill go over the schematics again to be sure. I'm stumped though.
-
Paypal email address? I'm ready to put in my order
-
both are too big 3.73's and big tires. Look at the cam sticky
Too big?
OP: ive run the 224/230 on a 114lsa and it was great, definitely would recommend it to anyone looking for a cam would good pull mid-high rpm and nice driveability. I'd go with a 3200-3400 stall
-
What's the duration?
-
Damn man! That's a nice ass truck.
-
-
What about a kbracing kit? He sells them all in a set and fairly affordable
-
Probly need a certain number of posts if you're trying to post in the for sale section. Never really been on there though
-
Ive used the scanner and have recorded to see if it would and checked dtc's but there's not really much to see if its actually doing anything, I didn't have any codes but it was reading my sensors because my passenger side o2 sensor is off and it was red on the screen
-
Thanks lol that's a nice truck
-
I don't have a fb, won't let me see it
-
Ill check it out when I get home, thanks
-
So I think I've tracked my problem to the ign 1 pin (pin 19, pink wire) on my pcm connector, its supposed to be key on and crank voltage but when the key is on there is no voltage. So according to this schematic
http://m.ls1tech.com/forums/attachment.php?attachmentid=182418&d=1243988421
Its a 15 amp fuse in the underhood fuse block but it says bottom, what does that mean? is there other fuses besides the fuses that we normally see? I'm gonna check it out when I get home but just wanna see if anyone knows.
-
Sup Justin, good to hear from you. Btw we never got pics of the new truck!
-
Man i'm new to the SS and all I can say is I wish you were my neighbor!!!! Man this is SSSIIIICCCCKKKKK!!!!! Now, time for me to start building mine lol.
Thanks man, its been a hell of a time building it. Now just ironing out the kinks. Good luck with yours
-
What's winter?
-
-
-
Checked all the fuses when I checked the voltages all was good. I've tried writing a different tune and I made sure the vin matched. Speed density was already on there from the procharger and its still speed density so no change there. I appreciate the ideas. Even tried asking on hptuners forum and not much there in the way of answers/ideas. Ill email support later this morning.
-
-
Well I bought new belltech street performance shocks, but didnt remember that they wouldnt fit the djm lca's so now im stuck with 2 front shocks that dont fit. whats the part number for the shocks that fit the djm lca's.
Tony if you read this would you be interested in trading me for shocks that fit for mine that dont?? I literally only took them out of the box this morning.
:) pretty please lol I really dont wanna try to sell these.
Help finding fuse for ignition
in PCM Tuning
Posted
Ill try those pins and see what I get, thanks.
And ill see if I can use the scanner, but the truck isn't running yet cause I still have the old procharger tune on there. I haven't tried cranking it because I want the new tune on there and my fuel pumps aren't priming when the key is on.
I can try it on my dads truck to see if its in the software or cable. im pretty sure I have a few credits left over.