Procelll

Seats and console are gone sorry. Pm replied

The truck thats being parted out is a regular silverado.

No I sold the cluster

I'm sorry. I didn't mean to hijack the thread jut trying to get info so I know more of what I'm needing to get for this swap also.

I understand the springs need to be changed. Do you rockers and retainers also?

Are the injectors and fuel pump required for that cam? Curious cause i was also going to be swapping in that cam in a few months.

Lodging/Airframe and Powerplant mechanic/theatre maintenance. Hopefully soon college for Mech Engineering.

I dont have the cab bolts or bed bolts. The steering wheel with all the other controls i swapped into another truck already. the Seats and memory were already sold. As for rear end id like to sell it as a complete item. it was a regular silverado. and i have answered most of the questions when i pmed them or replied to the ones that i had recieved.

I have a set of stock 16" rims

the rear end is pretty much internally new. I had just put 3.73 and a posi in it about 400 miles before the rollover. all bearings are change. I pulled the rotors off of it cause they were drilled and slotted and i had also just installed those. tony.ss did you recieve my pm about the guage cluster?

I pmed back but i guess it didnt go through. I have already sold the tach module dbw pedal and harness and the engine wiring harness sorry. I do believe i still have the switch panel for the outside dome light.

I've already sold the radio for it. sorry

Sorry seats are already gone

no body parts other than doors and they need work also. sorry i havent priced shipping or really replied much. ill get all the info to your pms about sunday or monday. Ive been busy with family and work with christmas

86xxx miles on it. the trucks mostly down the a cab and frame now. its located in arkansas zip code 71953

Parting out a 2003 chevy silverado due to rollover. Have pulled tons of parts. Let me know what your looking for cause I probably have it.

Its not staying NA. I plan on putting a magnacharger on it as soon as the funds come around. I don't want a cam that you can hear at idle. I'm wanting it to sound as close to stock as possible. I'd use the Gt7 but I'm not sure how long it would take me to get the funds for the charger.

Okay. Thanks guys. I was just thinking of doing the rockers to get more lift with the cam. I was planing on going ahead and having wcch work the 317 heads on it and I was going to go ahead and put hardened pushrods in it. The motor only has 42xxx miles on it so I'm not to worried about a timing chain

I havent purchased either yet but i was wanting to make sure before I did buy this stuff. I'm about the buy the LPE Gt2-3 Cam but i was wondering if it be okay clearance wise to run the 1.8 ratio rockers with it? I havent found anything on this site yet or performancetrucks and i havent looked on ls1tech yet but thats next. Help would be appreciated so I don't buy something im not going to use. Its in a 2006 Silverado ss also

Hey guys I appreciate it but it's to late I already order the p3 shallows and the p500-2 amp. How much are you guys lifting the boxes when u build downfire boxes though?

im not going for extremely loud just something that has a good thump to it. thanks for the input though

I not the greatest when it comes to choosing audio equipment so it be great if any of you could give me a personal preference or what would be the best to use. Im using the stock bose cd player with the pac interference and i know it will sound better with an aftermarket hu but id like to keep it stock for now and just add some thump im not going for the loud hear you coming or anything like that. Anyways what would you guys choose out of the two amps and would you prefer the 2 or 4 ohm sub. i'd appreciate any word on what to do would be great amps http://www.woofersetc.com/p6089/P5002--Roc...t-Amplifier.htm http://www.woofersetc.com/p6088/P4002--Roc...t-Amplifier.htm subs http://www.woofersetc.com/p5820/P3SD210--R...m-Subwoofer.htm http://www.woofersetc.com/p5821/P3SD410--R...m-Subwoofer.htm