[email protected]

I have 10K 55W highs and lows and they are plenty bright enough. This is the only pic I have with them currently.

2003 and 2004 were all AWD and had mechanical fans, 2005 could be either AWD or RWD, 2006-2007 were all RWD, and all three years had electric fans. 2003 and 2004 always had leather, 2005-2007 they offered some options such as cloth seats to make it a bit cheaper. They also had a sunroof option in 2005-2007. 2006-2007 had a different style hood and grill. I am sure there are other differences but that is the basics that I recall.

My hood showed up two days ago, pan showed up today, off to paint as well. Hopefully will have them on in a week or so as well.

I had a 4.3 single cab before my SS, and just exhaust and a good tune made a huge difference for it. I am sure all the stuff mentioned above is even better.

Mine needed a bit of prep work is all, smoothing and sanding. Nothing major, local guy did prep and paint on mine for $200.

That is the same price shipped they are from StylinTrucks, looks like the sale is still going too. That is the one I ended up getting, the brand is StyleLine by the way if it is the same, looks awfully close and given the price I am guessing it might be. http://www.stylintru...epc130121-.aspx

Wish I could afford it, I would totally come down and pick this up. Good luck with the sale.

Here is my other pistol too, ridiculous revolver that has no real purpose other than being neat and making a lot of noise.

I bought an LC9 a couple months ago as a small reliable carry gun and it works out great, weights hardly anything and fits in a pocket. It also fits my large hands very well with the optional pinky rest which is difficult to find in a gun that small.

I went with that first one to replace my current one as well, they line up very well, much better than I expected given how cheap they are. They do need a bit of body work before paint though,

I ended up getting a roll pan too, I have a guy locally that can do the install and body work to make it look good, hopefully this pan will work for that.

They have only made a few, search on eBay in the toys and hobbies section for Silverado SS and you will see a few examples. There is also a Hallmark Ornament they made awhile back as well as some larger stuff like the RC Intimidator SS.

If you end up wanting to order one of these and need a place to store it until you make the run down I am about 20 minutes from the Vancouver boarder.

I bought one of these a few months ago and it lines up great. I am thinking of getting a different style from the same company, I have http://www.stylintru...epc130113-.aspx and I don't much care for the way it looks in the front. Pretty sure I can sell my fully painted one for around $500, so I should end up breaking even after switching and getting this one painted.

http://www.SilveradoSS.com/forums/topic/31625-diy-for-dummies-int-steering-shaft-clunk-pics/ This took care of my wheel squeaking.

I have mine as well if you or someone else happens to need it.

I forgot about this as well, if you happen to have extras let me know.

That's definitely too far gone unfortunately, good luck with finding one.

I have an extra passenger mirror, do you happen to have a broken glass one or something that you can swap some parts out of or do you need the whole thing?

Finally got some good news on this so I figured I would share the resolution. I ended up finding a place in town that was able to remove the driver side rear bolt at a reasonable cost with only having to move the exhaust on that side. I submitted a claim to the Attorney General office in November and after the second reminder the shop finally responded on the 15th. They won't admit to any wrongdoing but they are willing to refund the $1000 and pay out an additional $500 towards the repair. It ended up basically being a free install and y pipe after all that, so I am satisfied with the resolution.

I got 8-10" up here as well, AWD donuts are awesome.

If they were 3" I'd take em, thanks though.

What's the best you will do for both dropped off in Blaine, and what size is the inlet?

They do look beat up, but the powdercoating will strip all of that away anyway. The rivets are the only thing that is causing me to ask the question, I like the overall design other than those.

Found a set of these pretty cheap locally, I would get them powdercoated black if I end up buying them. Do you think they would look good once refinished? Also if anyone knows what brand they are let me know, they were on a 2006 GMC Yukon XL if that matters. Owner says the brand is Baccarat Phang, but they are missing the extra plastic pieces which improve it dramatically. I still think I am going to pass just because the rivets are ugly and they probably have a huge stamp of the company name on the front somewhere.