ryanneugebauer95
-
Posts
123 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by ryanneugebauer95
-
-
My buddy has a 2012 r/t. All he has is the mopar intake and he was running consistent 14.5s at the track. His best was a 14.414 at 95 I think. I personally raced him from a 15 roll on the street and beat him by about 6 car lengths.. But I'm cammed too. When I was just bolt ons me and him were dead even. The r/t trucks have a 2800 stall stock, 4.11s and a beefier tranny. They're pretty quick for being bone stock. But the non r/t dodges aren't anything special.
-
It was a stock 65e with just vette servo and a tru cool 40k on it. Considering the 65e is only made to take 380ftlbs I'm very surprised it didn't go a long time ago. I'm gonna have mine built now though so hopefully ill have it back running strong in a week or two.. Or three lol.
-
At least I learned that Dallas raceway is one sticky track. I was going full out off the light and didnt spin one bit. Dead hooked. Time for a built tranny
-
Still in Crandall. I made it 15 miles then decided to call a tow truck. So it'll be making the journey home on a flatbed. I'm honestly really surprised the stock 65e lasted this long.
-
Well good news and bad news. Good news is my best ET was 13.7 at 97.. 1.9 60ft. Ill post the test tomorrow. Bad news is I think my tranny is done. It runs fine in 1st and 2nd but slips bad in 3rd and 4th. Zippy and zach said my 3-4 clutch packs are done. Guess ill check it all out tomorrow and try to make the 2 hour drive home. Wish me luck...
-
Ill let you know next time we go! I hope I can hook pretty well. That's my only problem. I have a buddy that has a new awd Denali with full bolt ons and I can beat him on the street.. But he has 24s he's running 17s tonight so we will see how that goes lol.
-
going to dallas raceway in crandall, tx today for test n tune! any tips guys? trying to hook the best i can on aired down 305/50/20 nitto 420s. two other members will be there. im sure zachm89 will be there in his z28 and he told me mr. p will be there in his truck. hoping to have some good times to show for all the work today! my goal is a 13.7 @ 98-100 wish me luck! will post time slips tonight or tomorrow.
-
Do y'all have a part number for either if those? Would strapping my front end help any? I just need traction I know Caltracs would help a lot though.
-
I have a 2wd vmax. It's creeping up on 100k miles still on the stock shocks. I need something that will help with traction as much as possible. I don't have a clue about how to fix my traction problem so I was hoping some of y'all could help me learn lol. I'm open to any suggestions. I watched a cammed and stalled 2wd tbss launch the other night and it left me spinning at the light, it just squatted and went. I have no clue what I need to do to get mine like that. Any help here guys! I need shocks!!
-
Zippy sent another update and we loaded it up and it's working pretty perfectly!! It's surged at one light but it never died othe then that the converter is locking perfectly and I'm finally getting the mileage I'm supposed to. Turns out it was all in the tune. Thanks for all the help guys!
-
Update for everybody, zippy is sending another update and we will try that out.. The surging has gotten better so I'm pretty sure it's just a tuning issue
-
Could my pushrods be the wrong length? They're tsp 7.4 which I thought was the normal. Any mechanical things y'all think it could be just say it and ill check it. At this point I just want the thing done lol.
-
Yeah I've talked to him. It has to be mechanical because even with logs it's not right.. And I know zippy is better than that. He's done a truck with the exact same cam I'm running with no problems. I just don't understand how the truck can run so good but won't idle in gear. I'm not even sure what to check anymore. Any ideas on what all I should check?
-
It will idle if I just shift it from park into gear while I'm stopped.. But if I come to a stop it just revs up and down and dies. Every once in a while it will settle and idle after a few revs up and down.. If in turning at low speed and let off the gas it will just die right away. We did the crank relearn, or well I think. I guess there's no way of telling if it worked or not.
-
Okay. Do you think it would be better to two foot it or drive it normal and let it die? A friend thinks it's something to do with throttle position sensor or idle air sensor if I even have those lol. It's just like there's too much load on the motor in gear or something.
Oh and mine is idled at 750 but when I put it in gear it drops to about 700 I think
-
Sorry I hit post on accident.. Anyways I thought with some logs it would be perfect this time. Is there anything else y'all think it could be? They keep saying drive it and it will learn but I tried that last time and it didn't change one bit. Any help here guys?
-
To update y'all.. We logged the truck Monday and we just uploaded the new tune zippy write up for me. Still won't hold idle in gear. When I let off the gas it just dies. I thought for sure with some l
-
The upholstery shop said they're heat molded together or something but I've seen them done a ton of times but idk where to have it done
-
Well I did my headliner in black suede a while back.. It's a pain in the ass to get right if you don't use the right materials.. Which I didn't.. So I have to do it again and I'm not gonna cheap out on materials lol. But I need to know if anyone knows how to do the visors!! I called the shop that did my back seats but they said they couldn't do it. I've seen them done in suede tons of times.. I should've asked the guys at the shows that had it done where they had it done. I was just wondering if anybody knows anybody who can do it or how to do it. Or if I could buy some from somebody or something.. I'm open to shipping them off to somebody and paying for them to do it.. I know this is a weird topic but any help would be appreciated guys!!
-
I'm sure he will fix it. Especially with some logs. Ill let y'all know the verdict when it's done!
-
Yeah he was trying to help us figure it out before we finally just decided to do some logs and he will retune it and fix it. So we will see how it goes!
-
We're gonna do some logs for zippy and he can just email me a new tune. Should've done that first.. Lol but what year was your buddy's 5.3? Cause the newer ones like mine don't have a pcv valve is all in the driver side valve cover. So I don't think it's that.. I'm sure it's just in the tune. Ill let you all know when it's finally figured out!! Hopefully some track times very very soon! What do y'all think it could run? I've been playing around with a few launch techniques and I've figured out how to not make it spin too bad. I clocked one 0-60 at 4.5 seconds with very minimal wheel hop.. Hopefully it'll be a good ET considering before it pulled 0-60 in 5.7...
-
I might try that. I'm pretty sure PVC valves are pretty cheap right? Or am I wrong. Anyways I might try that if not ill just have zippy tune it again
-
It's all pointing to the tune now.. I've run seafoam in the tank ad ran it through the vacuum lines and cleaned everything and double checked it all, so it's either the tune or something is wrong with the injectors. I'm not throwing any codes. It threw a MAF code but it was because it got some filter oil on it an I cleaned it again and it's still not right. It's still acting up.
SSS vs Viper
in Strip
Posted
I can't see the video on my phone.. And I know this is a month or so old but if it's an arrival blue SSS and a viper then it's zachm89 on here. His best is 11.7