D1SCSS

This is how Justin at BlackBear wants me to hook up my wideband... I'm going thru the EGR input....

The best price I can find on eBay is $195...

Have you checked eBay? I just bought a mint condition non lux Navigation head for my truck for $205! Also found new GPS antenna module for $25!

It fits!!!! Just remove the skid plate and bolt the intercooler to the frame....

Anyone with a 4 inch exhaust system that wants to quiet it down without restricting flow should try these FTE resonators out! I put a 12 inch resonator in my truck today a found the sound dropped 11 db!!!! I went from 101 dB's at idle to 90!!!!

Looks good!!!!

Why not run the 3 core? It will cool your iat better! Do you have a P1 or a D1?

Dude, that looks awesome!!!!!

I bought my corvette caliper stickers off eBay. They have been on my calipers for almost a year and still look new. Not bad price either....

Well last weekend i finally finished my Bosch 044 fuel pump with the 8AN fuel line! All I have left is to install my ID1000 injectors once I get my tune from Blackbear. The pump is a little noisier than the OEM pump, however you cannot hear it once you start the blower whine!!!! I also had a cat convertor plug up so I had to gut them both out. Now my truck I SO loud that I ordered 2 FTE resonators to help with the deep exhaust notes.

Are you sitting on the bump stops? I have to cut mine to help with the ride.

Any pics of these CF radiator covers?How do they hold up to the heat over time?

Still looking for one!!! Someone outside of California has to have one!!! I'll pay top dollar for yours!!!

Looks very nice!!!

How much for the radiator cover?

This is copied staight from my GM service information....The correct way to bleed the PS system!!!! Fill pump reservoir with fluid to minimum system level, FULL COLD level, or middle of hash mark on cap stick fluid level indicator. If equipped with hydro-boost, fully charge the hydro-boost accumulator using the following procedure: Start the engine. Firmly apply the brake pedal 10–15 times. Turn the engine OFF. Raise the vehicle until the front wheels are off the ground. Refer to Lifting and Jacking the Vehicle. Key on engine OFF, turn the steering wheel from stop to stop 12 times. Vehicles equipped with hydro-boost systems or longer length power steering hoses may require turns up to 15 to 20 stop to stops. Verify power steering fluid level per operating specification. Refer to Checking and Adding Power Steering Fluid. Start the engine. Rotate steering wheel from left to right. Check for sign of cavitation or fluid aeration (pump noise/whining). Verify the fluid level. Repeat the bleed procedure, if necessary.

MBRP muffler sounds great also! I had a magnaflow system on my truck but got tired of the drone...

SO SICK!!!!!

GM says to NEVER have the engine running when you are bleeding the PS...Toyota has the same point of view also....You can do it any way you want, its just not the preferred method for GM.....

The engine should be off with the front wheels off the ground when you turn the steering wheel lock to lock.....

Wow!!!!! That looks great!!!

Very nice!!!! What else did you get???

Try a wrecking yard.