SSmoothSilSS

Have both.

He just did mine in Blue stainless, looks killer, I may get installed this weekend and will take pics.

Here you go. http://www.nelsonperformance.com/fan-harness

Here's my two,

Update, installed new Belltech springs, shocks, AC spark plugs, new Nitto 555 in the rear, I found a used dash top with no bad spots, rear cab interior corners and back cab trim in new condition. Replace battery connections, washer bottle was cracked and hole in the tube. Repainted the battery tray. The bad I can not get broken header bolt out, its FUBAR may have to pull the head.

I always get compliments and thumbs up. A lot of people think its a new truck.

Nelson Performance sell it for $109. I think also Zippy does. And Blackbear Performance use to not sure they still do.

I like it,

There is Bikelikenation selling new fiberglass ones for $195 for 2 on ebay. http://www.ebay.com/itm/03-06-Chevy-silverado-1500-Front-Bumper-Brake-Air-Ducts-SS-/28184611

No I got this one out of New Mexico, looked at that one but if I remember it had the 5.3 (?) this one has the 6.0 replant.

Not sure on what I'm going to do with the motor yet, I will probably spend the winter getting the small stuff done and see what I want to spend. Thanks man, at least I'll everything is done right when I get done, it just sucks not having a lift in my garage.

Probably need to down size them, go here, http://www.shrinkpictures.com/

I would take pictures of what you need to replace and throw a thread in the for sale section as WTB (want to buy) you will get it cheaper here than any dealer. Specify what you mean by cab corners, and door sills, are you talking metal corners and rockers or the plastic cladding?

You would look much cooler with the other 03 grille and cowl hood and send me that grille, lol.

Thats an expensive headliner. On mine the past owner tried installing the one of the SSS he bought all the clone parts from and with the sunroof in it didn't work out. So I'm either buying a stock one or I just might as well have upholstery shop do one up for me. So to night I dug into replacing the front springs a shocks, I have the wheel liner out to change spark plugs and found a broken exhaust bolt, got all the bolts out and will try to extract it tomorrow, and I talked myself that since I there i might as well to the ball joints. I have rack and pinion and it has a leak so here we go spending more money.

I was looking at them but wasn't sure of the quality, I want a dark charcoal, did you get the factory cut pile or plush cut pile, with the backing?

Complete SSS interior torn apart, will add SS mirror, Blue lighted Stainless Steel cluster gauge, blue LED climate control, door swiches, head, fog light switches, and SS Grant Steering wheel with blue LEDS.

Well I thought I would get started in here with my SS clone, I bought this mostly done but with alot of issues. I anal so everything that is not right is an issue. So right off the bat, long story short, the shipping company busted the drivers duct and scraped the front bumper when trying load it, I submitted a claim and it is going through right now and hopefully get a check for 7-800 for that. Some of the the issues, no rear shock extenders, rear bumper not level, interior pieces cracked or scuffed up, carpet not clean, headliner not complete because power sunroof was just installed, front lower to low for the roads in my area, front tires size to small 225/30/22, found broken wires in the engine area after the 6.0 swap, passenger door water leak, hood latch cable broken, antenna broken. So this week I started tearing it down, replace hood latch cable and replace antenna (pia). And added the rear shock extenders.

Got my springs and shocks and shock entenders from Tony, thanks.

Looks nice, what drop is that a 5/7? And any issue with tire rub?

It might be, did the 06-07 SS HD come with only black honeycomb and the intimidator with the grey?

Looking for OEM Black with grey honeycomb in nice shape. HD type for 06-07.

The guy I bought the truck from did have one, thanks

Also this place has all the cladding and fender, but is not cheap. http://www.quirkparts.com/auto-parts/2003/chevrolet/silverado-1500/ss-trim/6-0l-v8-gas-engine/body-cat/exterior-trim-fender-scat

There is link in my thread that will give you the size of the brackets. http://www.silveradoss.com/forums/topic/86458-how-to-install-your-fog-light-wiring-to-factory-switch/