rgp6373
-
Posts
277 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by rgp6373
-
-
the 797a is only rated to 360 ton but we quite regularly put 400 ton on them .and my mstake that one is a 797a, and this is the first one this has happend to. our mine has had them for almost 8 years now . there are 14 , 797a's in our fleet and 15 797b's as well as 36 komatsu 930e . the 797b is rated to 390 ton in our application and yes i run them but i ususally run the shovels that load them now ( p&h 4100boss )
-
we will probably take most of it apart right there and transport it on lowboys to our shop and rebuild it there
-
actually the tires are about 12 feet high and thats a 400 ton haul truck there is no bigger truck you could fit 4 kw rigs in that box. its a caterpillar 797b
-
this is a caterpillar 797 haul truck after the tie rod snaped and the front end drove into the ground the operator was ok
one more 
-
What size pulley did anyone elses 122 come with ? mine came with a 2.8 havnt started it yet will be another week for that cause the harness to hook up my 90mm is mia . just hope that dont make to much boost with that pully
-
yeah the guy they had assigned to work on my truck called in sick so it will be a little late hopefully sept 9 i will be able to go get it .
-
the camera will be clicking as soon as i walk into the shop , well right after i am done cryin over the bill hahaha
-
thats at about 1600 ft and like i said the tc isnt set up properly yet . just have to wait and see i guess
-
well i just dropped my truck off to have the mp122h put on as well as new fuel pump , 60lbs injectors and 90mm intake , and a new tune it ran 13.2 @ 99 mph last time but that was without a tune for the tc so i think it would have been in the 12s with the right tune . cant wait to get it back
-
yeah i was driving it today its good just need to set the lock up speed different have to watch the transmission temps for now
-
i am going to get one in about 2 weeks just wondering if its ok to drive around without it
-
if i am getting a tc installed with a 2600rpm stall do i need a new tune or will it run ok without it ? i have a custom tune but i wont be able to get down to the shop for a week or so
-
i actually still have a predator 500 my friend with the camera was riding it . i just use my home powerwasher at the end of the driveway to clean them
-
you cant really see cause o the mud but mines an outlaw 525 . the 450s are awsome on the track but no good when it comes to that kind of trail riding
-
whats a boose ? hahaha
-
after a week of rain decided to go for a ride . lots of clean up but lots of fun
one more
-
i am only getting about 4.5 lbs of boost with the 2.9 pulley on the 112 so its mostly the motor pullin the truck . i am hopin for 10 to 12 lbs of boost out of the 122 should give it some snap . i ran an srt8 charger and 300 threw the 1/4 and neither kept up like that cherokee maybe after that they might run him down .
-
one of my best friends just bought an srt8 cherokee so right after he broke it in it was go time . we did a bunch of races from a roll and a stop and i was always just a half a truck ahead slowly pulling away . i think by the end of the 1/4 mile it would be a full truck . cant wait for my tc and my mp122 . dam fast truck for stock tho way faster than any of the other srt8 cars
-
any updates on instalation ? my mp122 goes on in 3 weeks , i can hardly wait . altho they sent a polished one which i didnt want but i am not waiting for another one
-
davenport in carlgary is where i had all my work done . i would highly recomend them . but the mp122 they have is mine haha
-
i had a simalar noise at high speed my dealer replaced my front gear set and now its gone . i know my dealer very well i have 60000 miles on my truck and they know eveything i have done to it and they still did it under warannty
-
i always let it warm up . i got the spring fixed it was on the other head so i think i got a bad batch of springs . so i made an appoinment to get them all replaced . i think i will be splitting the cost with the shop cause they shouldnt break but then agsin there is no warrenty on stuff like that
-
i just broke my second valve spring in 2 months . they are comp dual springs and i was told they are good for 700hp or more and i dont make that much so what could cause the failure ? it was the outter spring both times different cylinders . maybe a bad batch of springs not sure what could cause a spring to break
-
i really need to get a gps to know how fast i am really going speedometer is way to inaccurate
Speed Bump
in Video & Photography
Posted
its not the 40 extra tons that caused it more likely is the bump he hit before that when all six wheels were in the air ( it does happen and its a hell of a ride just really hard on the truck )