ccgoodwrench

i have a 70 chevelle malibu, I would like everyones thoughts on a price to sell it. I did a complete frame off restoration, it is about 75% finished, all is left is body work and new interior, I have about $7,500 invested so far. I put in new trunk floor,new goodmark quarter panels, drivers side door skin, front floor pans, I also have new front fenders, cowl hood, It has a complete rebuit 350 motor bored 30 over, rebulit trans, turbo 350 with bm shift kit, holshot touque converter, rebuilt aburn posi rear with 3.37 gears, stainless steel brake lines and fuel lines. just thougt i would get every ones thought on a price, and frist dibbs' if interested thanks chris

would you happen to know the the part numbers (GM)

I have some HPT scans, but I do not know how to send them, I have a Viglante 2600 stall,and other bolt on's. My 60ft. times are 1.9 to 2.1.

I wonder if we all write to gm and say we want this truck, they would sell at least 1000 to the people on this site, maybe, just my .02

It raises the front wheels of the ground

That's BS

good one

110, speed limiter. and i did notice the hood starting to wiggle, I think Mr. P has a good idea with the rubber in between the hood and grill. I wonder if that will help track times.

nobody has any thoughts on this

My stock fuel pump is going bad , I want to upgrade to a higher volume, and after searching I'm still confused, can any body help out with part numbers and pics if their is modifacations involed. 03 return system

it came out of a o3 ss silverado, fleetside bed I,m not quite sure what other years it will fit, 99-07 I think

Anybody looking for a bedliner for a short bed? gm factory part no. 12497550, and tailgate protector part no. 12490674 all hardware included (12screws) $100.00

I beleive that fork thing would be used on a coil spring suspension, it would be pressed into the bushing and you can bolt it to the bottom of the a-frame if you can picture that.

take the bed off too and you might see 9"S LOL

I was looking into or if is possible to convert the brake caliber brackets+ calibers from a 3500 series truck or even a 2500 series, I was at a couple of junk yards today but they were closed. If they even have larger brakes then the 12" on the ss? I just think it would be a lot cheaper even if you would buy new calibers and rotors from GM. just wanted to know if this can be done?

do you have the over head console with the home link buttons and wiring harness?

got my vote, they sound good

How did you tune the truck with those injectors? how much would you want for those injectors and would you trade them for stock parts, i have exhaust manifolds, altenator, thermostat, muffler and tailpipie with tip, fan shourd+clutch fan

If you use the injector caculator. the stock injectors are barely enough for the stock motor.

not liking the doors, oh but it has a chip what a moroon?

I saw a blue SSS towing a race car at atco raceway about 7pm friday night was it anybody from here?

I ran at the track the other night and i'm seeing 100% injector duty and sometimes higher. My question is the delphi's part no. (17113813) the right ones to replace the stock ones? And if anyone can help out with the tunning of these injectors, I have HP tuners.

thats what i did and it work great

sorry to hear about your truck and car glad you and your wife are ok