Jump to content

03CHEV SS

Member
  • Posts

    127
  • Joined

  • Last visited

Posts posted by 03CHEV SS

  1. I've read several post about guys lower the rear of there trucks and removing the gas tank. You don't have to remove the tank to change out the springs. I lower my dad's truck 4-6 which is the rear flip. What I done was have him order some new bolts from GM for the front hanger and used a saw-all to cut the bolt. Loosened the nut drove the bolt in towards the tank and cut it off then drove the rest out. During installation just put the bolt in from the outside in and the nut goes on towards the tank. This way you don't have to wrestle the tank. Bolts were fairly cheap I think. Happy lowering!!

  2. I personally would plug it in the night before you start it. It will help heat the oil up and put a

    battery charger on it just before you start it. Just my opinion.

    I live in CO and plug my truck in every night in the winter.

  3. What I would like know is list of people that can tune my computer. Ive seen a couple company that tune like Western. I would to see if their is more than that. I would also like to see want tuner you went with and your opinion of the gains. I know somebody will say do a search but I would to gather all the information under one topic so I can start calling for a tune. Thanks Tony

     

     

    Also along with their names maybe a phone number or a web site. Thanks again.

  4. What I would like know is list of people that can tune my computer. Ive seen a couple company that tune like Western. I would to see if their is more than that. I would also like to see want tuner you went with and your opinion of the gains. I know somebody will say do a search but I would to gather all the information under one topic so I can start calling for a tune. Thanks Tony

  5. On the driver side tie-rod on the inner neckle (directly under steering box) I cannot get that thing to take grease. I removed the zerk and grease will go through it. I also took a small wire and checked for obstruction in the knuckle but the grease was Ok and hole was open. So I put old grease zerk back on still wouldn't take grease so put another zerk on and still wont take grease. WTH is going on!! Please help me here. Its the only one that wont grease. I would like to grease. Thanks

  6. So what is it. Mine rattles too. Is it a on-star mic,a/c sensor, or a speaker. I dont think its a on-star mic cause my truck doesn't have on-star and it has the mic. I sure GM wouldn't put the mic in if it was equiped with on-star.

    So if anybody knows for sure please tell us. Thanks

  7. I have question about duel exhaust. I would like to put 2 mufflers on my truck for some better sound. I had a 96 chev. once and put duel mufflers on it and it turned the SES light on because of the 2 mufflers. I was like a code for low restriction on the exhaust I think its been along time age. So my question is if I put the duel exhaust on this truck will I have any time with the SES light coming on or any other trouble. I would eventually like to get the computer tuned but tell then just some duels. Thanks

×
×
  • Create New...