rprichardsjr Posted June 19, 2005 Report Share Posted June 19, 2005 I installed McGoughy's lowering kit and have a drive line vibratiion going up long rolling hills at 70 to 75 mph. Any one have a fix? I used the deluxe kit with spindles and have tried both setting in the front brackets and reat shackles. Bob Quote Link to comment Share on other sites More sharing options...
r8rs4lf Posted June 19, 2005 Report Share Posted June 19, 2005 Degree shims. I believe 2* shims are the ones. I have the same vibration along with alot of other people here. Late- Alex Quote Link to comment Share on other sites More sharing options...
04CHASE Posted June 19, 2005 Report Share Posted June 19, 2005 yeah i have it too, just havent got around to getting them Quote Link to comment Share on other sites More sharing options...
Tony-CA Posted June 19, 2005 Report Share Posted June 19, 2005 (edited) I'm curious as to what these 2 degree shims look like and where you're supposed to install them. Do they go under the trans mount? Edited June 19, 2005 by Tony-CA (see edit history) Quote Link to comment Share on other sites More sharing options...
r8rs4lf Posted June 19, 2005 Report Share Posted June 19, 2005 I'm curious as to what these 2 degree shims look like and where you're supposed to install them. Do they go under the trans mount? <{POST_SNAPBACK}> Here is an example of some. They go between the axle perches and adjust the pinion angle. Late- Alex Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.