Corpserodeo666 Posted November 7, 2006 Report Share Posted November 7, 2006 Ok I poped up 7 codes from the dealer. Help me out here. P0054 P0060 P0138 P2A01 P2A04 I have no clue what any one theme mean. And if any of them are seriouse. Quote Link to comment Share on other sites More sharing options...
Professiona1 m0d Posted November 7, 2006 Report Share Posted November 7, 2006 (edited) DTCs: P0054 - HO2S Heater Resistance Bank 1 Sensor 1 P0060 - HO2S Heater Resistance Bank 2 Sensor 2 P0138* - Oxygen Sensor Circuit Hi Voltage Bank 1 Sensor 2 P2A01 - HO2S Performance Bank 1 Sensor 2 P2A04 - HO2S Performance Bank 2 Sensor 2 Sounds like you have bad O2 sensors, I could be wrong though. Edited November 7, 2006 by Professiona1 m0d (see edit history) Quote Link to comment Share on other sites More sharing options...
Corpserodeo666 Posted November 7, 2006 Author Report Share Posted November 7, 2006 DTCs: P0054 - HO2S Heater Resistance Bank 1 Sensor 1 P0060 - HO2S Heater Resistance Bank 2 Sensor 2 P0138* - Oxy Sensor Circuit Hi Voltage Bank 1 Sensor 2 P2A01 - HO2S Performance Bank 1 Sensor 2 P2A04 - HO2S Performance Bank 2 Sensor 2 Sounds like you have bad O2 sensors, I could be wrong though. <{POST_SNAPBACK}> Dont have o2s and I don't have cat's thats a good thing. The rest was tunned out. I just cant put my finger on it. Would that be it. Could it be a plug by any chance? Quote Link to comment Share on other sites More sharing options...
Professiona1 m0d Posted November 7, 2006 Report Share Posted November 7, 2006 Do you have sims instead? I don't have O2s or cats either (and no sims), however, I just disabled all the MILs with my HP Tuners software. Quote Link to comment Share on other sites More sharing options...
Corpserodeo666 Posted November 7, 2006 Author Report Share Posted November 7, 2006 I really have no clue the tune was done by zippy a while back. I mean I really have no way of going back to my logs. I mean frank has helped me out before but hes real busy these days and I don't really want to distract him. But As far as the rest I have no clue. It went off as soon as I put my long tubes on. Quote Link to comment Share on other sites More sharing options...
Professiona1 m0d Posted November 7, 2006 Report Share Posted November 7, 2006 Hmmm... I mean there is only so much you can disable as far as MILs go. If you have sims in there, it almost sounds as if they are not being grounded properly. Maybe due to ceramic coating? Or even maybe they are bad. I'm stumped on this one. Quote Link to comment Share on other sites More sharing options...
Corpserodeo666 Posted November 7, 2006 Author Report Share Posted November 7, 2006 I mean i have no O2's running at all. Im not 100% sure what sims are. I might be thinking of something else. Quote Link to comment Share on other sites More sharing options...
Professiona1 m0d Posted November 7, 2006 Report Share Posted November 7, 2006 Sims would be O2 sensor simulators, which replace the true O2 sensors to fool the computer into thinking the O2 sensors are present and operating normal so you don't throw codes. Quote Link to comment Share on other sites More sharing options...
jester08 Posted June 1, 2007 Report Share Posted June 1, 2007 Yeah, when I removed my Buick oxygen sensor... Since then my computer has been throwing codes on me... Until I brought it to my dealer and had it fixed by getting a SIM... Which a software representation of the real O2 sensor... So that, the computer would not throw codes like P0138... Quote Link to comment Share on other sites More sharing options...
detjoe Posted June 2, 2007 Report Share Posted June 2, 2007 get'em cleared and see what comes back. Check you plug wires and all the stuff you touched putting the headers on...did you take the plugs out? What I have been doing is finding guys local who have HP tuners so I can get logged runs to send to Zippy, I have just found one guy from another fourm that runs LS stuff so I am getting closer...but the best way to make sure is to see the computer stuff... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.