BenKey Posted December 30, 2003 Report Share Posted December 30, 2003 Anyone know the factory setting? I think I just hit it. Came around 5870 rpms. Link to comment Share on other sites More sharing options...
BigTex Posted December 30, 2003 Report Share Posted December 30, 2003 I think it should be about 6000 on the stock tune. The dash cluster is a little slow, so you could have hit it. You need to log it with autotap or EFI live to know for sure. Link to comment Share on other sites More sharing options...
cadowns Posted December 30, 2003 Report Share Posted December 30, 2003 Sounds right. What did it feel like? As thought it fell on it's face? ;) I have had this problem for a while. Hope to get it all sorted out in TX with farmtruc. Happy New Year, CD Link to comment Share on other sites More sharing options...
BenKey Posted December 30, 2003 Author Report Share Posted December 30, 2003 I was logging with EFI. Came in @5871. It slowed down some, shifted to second and was back to running like a scalded dog. The only thing that was a little different than when I normally might get on it is I was turned a little, coming out of a curving turn. Link to comment Share on other sites More sharing options...
m396 #00-011 Posted December 30, 2003 Report Share Posted December 30, 2003 I thought the stock tune was 5600 if 1st, 5400 in 2nd. I will go check for sure on break in a little while. Edit: It's been a long day 6000rpm is the stock rev limit setting in drive, and park. I was thinking of shift rpm's at first Link to comment Share on other sites More sharing options...
mwalls54 Posted December 30, 2003 Report Share Posted December 30, 2003 going by my tac i reach 6000 on a stock tune Link to comment Share on other sites More sharing options...
rico750sxi Posted January 1, 2004 Report Share Posted January 1, 2004 I think it is about 5600rpm. Trying to remember what I raised it from when I adjusted it. Link to comment Share on other sites More sharing options...
MustBBrent Posted January 1, 2004 Report Share Posted January 1, 2004 Anyone know the factory setting? I think I just hit it. Came around 5870 rpms. Engine RED line is 6000 in stock pcm if I remember when watching Allen change everything in mine and I think it shifts around 5700 in first and 5400 in 2nd. My truck now shifts at 5900 in first and the RED line is now 6250. Link to comment Share on other sites More sharing options...
deezel Posted January 2, 2004 Report Share Posted January 2, 2004 Stock rev limiter is 6000 on the main tab in Edit, but the ETC limit by gear is 5900. I imagine Ben found the ETC rev limit. Link to comment Share on other sites More sharing options...
MustBBrent Posted January 2, 2004 Report Share Posted January 2, 2004 Stock rev limiter is 6000 on the main tab in Edit, but the ETC limit by gear is 5900. I imagine Ben found the ETC rev limit. what is the ETC? And can it be changed? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.