HDMLNIUM Posted January 17, 2004 Report Share Posted January 17, 2004 Well I will be doing a few mods tomorrow, thought I would check in to see if there is anything I should know. I will be doing; the Flex-lite 282 electric fans the ASP underdrive crank pulley and the 180 degree thermostat and housing. So any helpful hints or anything I should know before I get started? Or are these pretty straight forward jobs? Thanks, Bill-03-SD Link to comment Share on other sites More sharing options...
blownchevy Posted January 17, 2004 Report Share Posted January 17, 2004 Sounds like some pretty straight forward mods. A few hints: On the E-Fans, it is VERY important to get a good ground! Do not ignore this! Pulley, self explanatory T-Stat, make sure to use a lube like Vaseline on the o-ring to ensure that it does not slip out when installing it. Link to comment Share on other sites More sharing options...
Farmtruc Posted January 18, 2004 Report Share Posted January 18, 2004 A standard three claw puller will work. I like the craftsman adjustable puller. the rest is pretty straight forward. good luck, allen Link to comment Share on other sites More sharing options...
HDMLNIUM Posted January 18, 2004 Author Report Share Posted January 18, 2004 Thanks for the replies, I will give it a shot in the morning. Bill-03-SD Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.