ryanneugebauer95 Posted February 10, 2013 Author Report Share Posted February 10, 2013 I'm sure he will fix it. Especially with some logs. Ill let y'all know the verdict when it's done! Quote Link to comment Share on other sites More sharing options...
ryanneugebauer95 Posted February 20, 2013 Author Report Share Posted February 20, 2013 To update y'all.. We logged the truck Monday and we just uploaded the new tune zippy write up for me. Still won't hold idle in gear. When I let off the gas it just dies. I thought for sure with some l Quote Link to comment Share on other sites More sharing options...
ryanneugebauer95 Posted February 21, 2013 Author Report Share Posted February 21, 2013 Sorry I hit post on accident.. Anyways I thought with some logs it would be perfect this time. Is there anything else y'all think it could be? They keep saying drive it and it will learn but I tried that last time and it didn't change one bit. Any help here guys? Quote Link to comment Share on other sites More sharing options...
JC03SS Posted February 21, 2013 Report Share Posted February 21, 2013 I would also say drive it. Checked mine to let you know I idle at 500rpms. Just BECAREFUL and drive her a little Quote Link to comment Share on other sites More sharing options...
ryanneugebauer95 Posted February 21, 2013 Author Report Share Posted February 21, 2013 Okay. Do you think it would be better to two foot it or drive it normal and let it die? A friend thinks it's something to do with throttle position sensor or idle air sensor if I even have those lol. It's just like there's too much load on the motor in gear or something. Oh and mine is idled at 750 but when I put it in gear it drops to about 700 I think Quote Link to comment Share on other sites More sharing options...
JC03SS Posted February 21, 2013 Report Share Posted February 21, 2013 2 foot it but don't over do it. No sense in letting it die. If you keep it a tad higher like 850 or 900 will it stay idling? Did u already do the crank shaft position relearn? Quote Link to comment Share on other sites More sharing options...
ryanneugebauer95 Posted February 21, 2013 Author Report Share Posted February 21, 2013 It will idle if I just shift it from park into gear while I'm stopped.. But if I come to a stop it just revs up and down and dies. Every once in a while it will settle and idle after a few revs up and down.. If in turning at low speed and let off the gas it will just die right away. We did the crank relearn, or well I think. I guess there's no way of telling if it worked or not. Quote Link to comment Share on other sites More sharing options...
The_aSSet Posted February 21, 2013 Report Share Posted February 21, 2013 not sure why youre having trouble. Mine ran great from the time the cam+tune was in. No 2-footing it to learn. Theres gotta be something wrong, either mechanically or tune. check and recheck everything Quote Link to comment Share on other sites More sharing options...
Fireman31 Posted February 21, 2013 Report Share Posted February 21, 2013 Did you call Zippy? Quote Link to comment Share on other sites More sharing options...
ryanneugebauer95 Posted February 21, 2013 Author Report Share Posted February 21, 2013 Yeah I've talked to him. It has to be mechanical because even with logs it's not right.. And I know zippy is better than that. He's done a truck with the exact same cam I'm running with no problems. I just don't understand how the truck can run so good but won't idle in gear. I'm not even sure what to check anymore. Any ideas on what all I should check? Quote Link to comment Share on other sites More sharing options...
ryanneugebauer95 Posted February 21, 2013 Author Report Share Posted February 21, 2013 Could my pushrods be the wrong length? They're tsp 7.4 which I thought was the normal. Any mechanical things y'all think it could be just say it and ill check it. At this point I just want the thing done lol. Quote Link to comment Share on other sites More sharing options...
ryanneugebauer95 Posted February 21, 2013 Author Report Share Posted February 21, 2013 Update for everybody, zippy is sending another update and we will try that out.. The surging has gotten better so I'm pretty sure it's just a tuning issue Quote Link to comment Share on other sites More sharing options...
JC03SS Posted February 21, 2013 Report Share Posted February 21, 2013 Hopefully it works out for ya ill keep thinking as well let's us know what happens Quote Link to comment Share on other sites More sharing options...
ryanneugebauer95 Posted February 24, 2013 Author Report Share Posted February 24, 2013 Zippy sent another update and we loaded it up and it's working pretty perfectly!! It's surged at one light but it never died othe then that the converter is locking perfectly and I'm finally getting the mileage I'm supposed to. Turns out it was all in the tune. Thanks for all the help guys! Quote Link to comment Share on other sites More sharing options...
JC03SS Posted February 26, 2013 Report Share Posted February 26, 2013 Glad you got it worked out now go have some fun with that thing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.