mmcdonald02ss Posted December 2, 2015 Report Share Posted December 2, 2015 Got my truck back from the transmission shop about a month ago with a rebuilt trans(with better internals) & a 3000 stall This past week i had an issue with the shift solenoids not allowing the truck to go into overdrive and messing with the shifts. Well now when i try to drive it in 1 or 2 because drive is not working there is a loud squealing noise coming from the transmission or transfer case. I am wondering what this could be and if it would be as simple as clearing the codes from the truck and deleting out the codes on the tune. Any help would be appreciated. Quote Link to comment Share on other sites More sharing options...
Thickcajun Posted December 2, 2015 Report Share Posted December 2, 2015 Dis you tune after rebuilding. With that stall you definitely need a tune Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
mmcdonald02ss Posted December 2, 2015 Author Report Share Posted December 2, 2015 Truck was tuned for a 3k stall, but the shift solenoids werent taken out of it Quote Link to comment Share on other sites More sharing options...
EXGM Posted December 2, 2015 Report Share Posted December 2, 2015 (edited) Does it sound like this? Sorry couldn't resist.... On a more serious note dId your transmission shop clear the tap cells? Edited December 2, 2015 by EXGM (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.