TheGeorgiaKid

I got my Doug's cutouts at PerformanceCenter.com here's the page http://www.performancecenter.com/partnumber/DUGDEC250 for the 2 1/2" ones & http://www.performancecenter.com/partnumber/DUGDEC300 for the 3" ones. They have the best price I found on them & anything else. Next time I have access to a lift I will post pictures of my exhaust system, bet you won't see another one like it. Later Guys.

12'SROCK, Do you know what the LSA is on a stock SS cam?? Thanks.

I'm planning on a 3000 to 3500 stall converter & also a shift kit at the same time as the cam.

I knew the 1.8:1 rockers on the exhaust side were offset. I ment to say if you could use regular rockers the 1.8:1 ratio would work with that cam?? I looked at CraneCams, they have one that is .228 I/.232 E duration @.050 .600 I/.600 E lift 112 lsa with 1.7:1 rockers. How would that work?

My truck came with e-fans. I'm planning on a shift kit & TC when my warrenty runs out. Also planning on full cam upgrade, springs, pushrods, lifters & roller rockers. Just thought the ported throttle body would be good too.

So for instance if I did a .591 lift cam & 1.8 ratio rockers from a Z06 LS7 I don't have to worry about the valves smacking the pistons? Anyone tried that setup, would it work?? I'm new to this, I'm use to classic small blocks, so if I sound dumb it's because I don't know. Thanks Guys.

Is anyone else porting throttle bodys? I heard someone was doing them for Cameros & Firebirds. Couldn't they do one for a SS, it's about the same thing. I really don't want to do it myself. Thanks.

What is the most lift you can go with stock heads & pistons? Or the better question is, what is the most lift you should do on stock heads & pistons? I'm planning on upgrading the springs, pushrods, lifters, & using 1.7 ratio roller rockers. What about the 1.85 ratio roller rockers? Does it depend on the cam as to what the idle speed should be changed to? Also can the idle speed be lowered on a truck with the stock cam & get a little cam lope sound?? Thanks.

I want to buy a ported throttle body & keep my stock one. Who has them & is doing it. Thanks.

For sure post the pics. I've got a '06 silver birch. Been thinking about doing the same thing & would like to see what it looks like.

What's the part number for Energy Suspenision Swaybar Bushings? I'm wanting to do that to the stock front bar & then add a rear bar. What's the best brand rear bar to use with a 2" drop? Thanks.

Dynatech Cat Package is still available.

Cat Package is still available. They are now off the truck, boxed & ready to ship if anyone is still interested. They are not modified in any way & are in great condition with about 200 miles on them. Thanks.

Fireman331, No the cat package is not coated. I don't think you can get them coated. Only the headers are available coated. BTW: I got a tune from Charlie Wheatly done for my SSS & all I can say is WOW!! I see what you were talking about. That is how they should run from the factory. I love it!!

Still available. Anyone interested?

Cat Package is still available. Anyone interested?

Still available. Anyone interested?

That is correct, the headers fit the 5.3 & 6.0 engines. Part number for the headers is 115-841300A. I was thinking you could put a 6.0 cat package exhaust system on a 5.3 engine?

Well if you already have or are planning on Dynatech headers you could change the exhaust over to the way a 6.0 is with the split pipes. I don't see why it wouldn't work. There is enough room to do it. Might think about doing that??

Are you interested?

I have a new Escort Passport 9500i I want to sell. I'll take $455. for it. Anyone interested?

Cat package #115-841350B is for the 6.0 engine.

Right now it's still on the truck. If you go to Dynatech's website you can see what it looks like. Part number for the cat package is #115-841350B which costs $634.99 from Dynatech. It bolts up to Dynatech's longtube headers #115-841300A.

Since it's nearly new with 50 miles on it. How about $450. including shipping??

I'm wanting to do a custom split dual exhaust & really don't want to cut up the Dynatech cat package I have. Would anyone be interested in it? It has 50 miles on it. I can get two passenger side cat's from Dyantech to do the exhaust I want to do.