canadianVRss

Okay awhile back i had fluctuating oil pressure. I just finished putting I'n a new oil pressure sensor I'n and i start her up. Pressure goes max for a but then I'n the middle (275kpa) then to zero!!! So I'm like WTF man! So i take it for a quick spin and drive back to the yard. So this is what it's telling me now. Idle=zero oil pressure, 2000rpm = just under the quarter mark. Oil pump maybe??? Okay now the oil pressure sensor says 0 and my head unit doesn't work!!

PM sent

I totally forgot about these. I'll send you payment then ship it out whenever it's practical for you. That alright?

Happened to me at west Edmonton mall. Couldn't find it for like 10 minutes. Freaked me right out!

I agree! People have no respect for things when they're not theirs.

Upper ball joints would cause the misalignment that's what happened to me. Get that old girl aligned and get them to check your ball joints and the rest. GL

Yeah man they're high temp, I've never run my truck WITH the guards on.

LQ9 has beefier rods as well.

2005 AWD i have msd plug wires cat back and cold air intake. No tune with subs and an amp I'n the back (100lb) i dropped the spare to try and even things out. Temps were around 20C it was suuuper hot earlier so the black top was still really hot. And i had to wait I'n line for about an hour, it was too busy.

Went to the track for the first time last night. I ran a new Denali. I was I'n the right lane. Left lane. Right lane R/T .717 .592 60 2.465 2.379 330. 6.804. 6.764 1/8. 10.320. 10.414 Mph. 69.92. 68.00 1000. 13.350. 13.532 1/4. 15.884. 16.194 Mph. 89.35. 84.09 Any thoughts?

Wow 4000lbs! Yowzzza!

Two strips of double sided sticky tape. Retardedly hard to get off. You have to chemically strip it off the tail gate and wire wheel it off the plastic cap.

Yeah, that burns my ass how they screwed us over. They KNOW that people were going to mod these trucks. But i guess they were tied down, i didn't know congress had anything to do with it. Well they couldve at least put the 4L80e I'n the Canadian trucks god this diff thing is really stressing me out, i don't want to pull it out and rebuild it

PM sent

Wow well that sucks

I can't afford to have my truck down. It's my DD. What if i went to the scrap yard and snagged another diff and rebuilt that? Would a 4x4 diff work or does it have to be a AWD diff? I'm guessing AWD

okay boys, ill hit up the "how to" section and do some digging. i KNEW i should've done it myself:banghead: my front diff drain plug did have quite a few metal shavings on it though:shakehead:

I'll take a pic for ya when i get home Paul, just I'n the city looking after my ma's cats while she's I'n peru. hmmm fiberglass inserts? Can i buy these or do i have to make em? I HATE working with fiberglass, damn slivers

Wow that's exactly what it was! They were maxed to the nuts! All the way I'n i just lowered it back down and I'm on my way for a alignment. Thanks guys you were tons of help

So ive been planning on changing my diff and trans case fluid for awhile now. I read I'n an old post from the archives that the front diff should take 2+ and the rear 3+ so i bought 6 quarts of AMSoil and brought it to mister lube and got them to change it. After they were done he handed me 3 quarts back i asked him if the diffs were full and he said yes. So they used 3 quarts for front and rear. What do you guys think, should i go back? I had them do the trans case too and that took 2.5 quarts, which is spec i believe. (auto trac ll)

Yeah but it's pretty messed up.

I wish i did you would think that someone would make a aftermarket one or something. There was a silverado I'n the ditch all smashed up awhile back, i should of just jacked the ones out of it

My friend was drunk and tried to get out of the truck before opening the door and kicked it I tried bending it back, but it just wasn't the same im totally out of ideas...

Okay guys i know this is a LONG shot I'n the dark, but I'm looking for a speaker cover/grill and I'm all out of ideas. I've looked at the local pick and pulls, nobody here I'n Canada has speaker covers they want to part with because it's technically a part of the whole door panel so i went to GM, they want $620 for the whole door panel. went on eBay and actually found one after looking forever and he wanted $100 delivered!! Like come on, for a piece of screen. I need the passenger side I'n Bose or both I'n none Bose. Any help would be nice on this, please let me know if you know where to get one for under $100. Thanks guys.

makes me laugh when they do that!