LSR Mike

Can it make a phone call?

Ok, Texas Grocery Store...Yeah, got it, you should just send the people to aisle 13, no matter what they ask for.....

The Company that put up the Tent better have good insurance, they're about to get sued....IMHO

Vin decodes to a SRT 10

Whatever happened to Falcon Pilot?

Old trick, #1 make sure you have the valve rockers completely off of both valves on the cylinder your testing so they aren't opening the valves. Old trick #2 tap the top of the valves with a hammer under pressure to make sure there isn't any residual machining/grinding/cleaning material on the valve seats.

Obvious.....

Need to do the white face on the gauges too....another miss by the originator.....what about the headrests? are the SS's on them?

Everybody that say's "ewhat, some one else pump my Fuel, That's rediculous!" obviously isn't old enough to remember that was the only way it was prior to the original GAS Crisis in the 70's. Then everybody bitched that htey had to pump htier own or pay more for full serve!!!

You were laid off because you are studying for a Real Estate License, as far as your employer was concerned, you were gone anyway. They'll get another 15 year old kid to replace you... Good luck with your new career!

If you had a Supercharger you'd get better gas mileage...!!!

internet comet, same joke comes around every few months/years.somebody hasn't heard it. How many people have seen haley's comet? once in a lifetime event.

Hmm, I park way out in BFE next to you because I know you won't ding my truck, that's why YOU parked there. My peeve, when you ask someone if they want something this way or the other and then they want it both ways

I thought all 03's had the tow package? mines a 6 CD with manual split climate control, no XM, no block heater

Just a note about VIN's and Ordering Parts. I use the Mitsubishi CAP's Program for ordering parts for my Race Truck. If you have the VIN, That is the EASIEST way to look up parts, The database knows the build date of the vehicle and the correct parts/P/N's for your vehicle for when it was built, a later build date may have a different transmission variant, newer part etc. Without the VIN, you can still look up parts but with more difficulty and a possibility of a incorrect part depending on when a part was revised or updated like several parts for our Truck's. Mines a July of 2003, everytime it's in the shop, whatever get's replaced seems to always be replaced by a updated/revised part,I'm hoping they're better and will last longer :-)

What he said.....

Fuel Pump and Fuel Pressure Regulator.....$$$

Read the owners manual under towing.....Big chart

130K, just replaced the Fuel Pressure Regulator and Fuel Pump, and got the Speedo Fixed. save your money, You'll need it for these repairs!

The ENTIRE Cluster will ge replaced, It ain't just a single gauge anymore. The stepper motors used by GM in the gauge clusters are noted to be junk....but you get to pay $600 for a new one....

That joke started out back when people still used outhouses.....Why isn't it ever a woman?

Come down to Columbus, w have a couple of Red ones, and Blue ones.... Black with White sidewalls?? Ghetto

Leaving The Bonneville Salt Flats

130,000 on the way back from Bonneville this year, towing my record setting Mitsubishi thru Nebraska....

Just had mine done, Blend door actuator... I had to have my A/C On, upper vent selected, recirculate on, and the fan on to get it to stop, any other combo was a clomp, clomp, clomp, every second, for 30 miles before I found the combo. $391.75 the actuator was $81.16 labor $310.59