eeekroar

Holy crap, do you need every part replaced? What did they say was wrong with it?

HOWDY!

That's not bad . I have 14-16 week waiting on my S-12

hahaha, Glad you made it in, GOOD LUCK!

This is nothing gorilla glue, and a six pack can't fix

CONGRADULATION!!!!!!!!!!!!!!!!!!!

Welcome

He must tow Double wide mobile homes with that tank!

I thought I was doing something with a 55". Your watching a damn I MAX screen over there. I forgot to say add a couple coats of primer before paint. The compound will suck it up quick. If you don't want to spend a ton of money on different size knives and buckets, I think Walmart and Lowes sells two knives, tape, sanding block, bucket kit for around 10-15. Just be sure you get good mud compound. If you use a good hot mud, it is much easier to spread at first. Let it dry out too much and you won't pull a decent line to save your life. You will be fixing all your neighbors holes for spare change in no time!

That's not even an exaggeration. I can't think of anything worse that I have smelled. I guess,a mom brought all her babies in, or they were having a MICE RAVE! I have to climb up in attic to find were they came in from.

haha okay, it's actually very simple though. Get small 1-2" board the length of hole.Drill it into the dry wall on the inside. Make sure the screw sets into the wall. Put your dry wall back in the hole, whether you use the existing square or cut a new one.Drill them into the board.Personally, I will lightly mud the cracks to get the tape to stick a little better. Apply tape.Let it dry. Then apply a layer of mud.I like to use my index finger of the hand I'm using to mud with for pressure depending which side I wan to feather more. You want to apply it with the thinnest edge on the outsides. The first layer does not have to be thick, Let dry. Apply another layer. This time pulling the mud even further out to the sides. You want to create an illusion of nothing being there. A lot, easier than having huge lump in one spot then trying to feather it. If it is your first time you might have trouble with edges in the mud, You don't really have to apply any pressure with the knife unless you want to cut down heavily in one spot, EX the sides.Try to get them as smooth as possible, but if you cant get ever tiny edge out don't sweat it If you are unsure if you feathered it out far enough you can add another thin layer. There is no rule about how many you can put on, just don't make it thick in any spots. Next, you take your sanding block and start to work your way across, up and down, circles. Do not stay in one place or you will sand through in seconds. Make sure your edges are feathered as far down to the wall. You can check for dimples,ridges, etc with a bright light .<Fix. At this point you are done brother. PAINT! Unfortunately, I had A LOT of practice patching holes, and hanging new walls for a second 8 housing company I worked for. It seems everyone evicted punched holes in all the walls. Everyone has their "SPECIAL" way of doing it. Some guys won't mud at all before tape. Some guys only use two layers. I learned fast the first day to avoid leaving edges, because you have to sand all that shit off by hand. I will post some pictures up

Well,I heard them higher in the wall, and there is a middle stud going across the center of the wall so I figured they just fell to the middle board. There was a small gap were I dropped the saw. I think that's how they got down there. Luckily, I use to float sheet rock so patching is no problem . When I found the first one, I did a victory lap around the house with my arms raised above my head.

Well for a few days I thought I had a gremlin in my wall. After a few days the sound stopped. Then we started smelling a rotten stench. I kept telling my girl I was cutting a hole in the damn wall! After days of convincing her, she finally agreed. First hole..........NOTHING. The second hole, were I thought it might have fallen....... NOTHING! At this point my girl was cussing me. Third hole on the other side of the stud........ NOTHING, but it smelled like death. Then I dropped the drywall saw to the bottom. SSSSSHHHHIIIITTTTT! I said, well we got three holes, what is one more right?Went an grabbed a steak knife. Started cutting an almost started to throw up. So I grabbed my dirty pajamas pants and wrapped them around my face. My girl said ,It must be bad if you would rather smell your dirty ass and balls. Finally get though and OMFG! TWENTY DEAD MICE!!!!! The after math

I talked to Ross when I was buying my Bilsteins,but they were out of stock at that time. He gave me a discount code for us SSS guys though. DISCOUNT CODE- silveradoss5

Sweet! I'm try to let go of the Bose HU for a sweet DD

You could get an IP changer and stomp the competition

Dude.... It'll buff out. Just give it some elbow grease! That does suck. At least it is not totaled,or not able to be driven.

Doesn't matter to them because congress still gets paid.

That's a deal. I think I want the Corsa Touring. It's kind of a tough decision. Sure I can listen to everyone's on youtube but it will always sound different in person. I might have my bass up a lot more than it would be in real life. I am also looking into a rotor/pad upgrade, but I'm like you. That's a lot of money for brakes. I'm sure they are amazing, but I'm not trying to race at Laguna Seca. Luckily we have FIREMAN to help us out since he has went through almost every rotor setup. I might take his advice on the Acdelco,or go with the EBCs. It's tough when it's your money,but even tougher when it's your girls. If you don't like them and want to change a day after. YOU WILL NEVER HEAR THE END OF IT!

Man, you missed the 15% off at AutoAnything last night. I think you can still get 10% off with promo code. I annoyed the hell out of my girl and got her to order me a Volant. I was trying so hard for a Corsa though. I'm considering starting a fight in a couple days so she will order them to make me chill out. I'm so spoiled..... I was looking into Acdelco drilled and slotted rotors, but seems FireMan has some good user knowledge. These say they replace O.E. without modifications. I don't know if anyone has used them though http://cgi.ebay.com/ebaymotors/BREMBO-SPORT-CROSS-DRILLED-Brake-Rotors-REAR-PAIR-_W0QQcmdZViewItemQQfitsZModelQ3aSilveradoQ201500Q7cSubmodelQ3aSSQQhashZitem5adfac72bdQQitemZ390299677373QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Found my old camera.No enhancements.The close ups are kind of bad, but that was due to caffeine shakes I pissed them off after this picture by hitting them with the lens cap.OOPS My pond My new job, killing and removing these bastards I forgot the name of these, but they look awesome

Yeah, I agree. I knew a ton of guys that had gsxrs but none currently have them. All of them should of never bought them in the first place on the $99 a month sale. Others were too stupid to get insurance and were either stolen or laid down beyond repair. Two were repossessed.For some reason I like the Cyclops eye. Unfortunately, the REPSOL edition is out of my price range. Might just settle on the pocket bike. Better gas mileage haha

I recommend Pacesetters........then mailing them to me!

HOLY SHIT! That could of easily killed someone. At least he wasn't on a motorcycle.

I've voted every day. How the hell did LIVAKILLA have 4-5 votes a day, and then today gets 92?