porksoda

Would you sale the Dr.X harness separate?

What about the flex fuel injectors? Will they work in the rail and intake as long as I get the harness for EV6 to mulltech?

My only problem is them being like $400. Really can't afford them right now. I'd much rather find some for my setup now because it will be years till I throw a radix or something on.

After doing some reading I decided it would probably be best to upgrade my injectors for my next round of mods. Bought the truck mostly modified from previous owner and it was tuned by Zippy so I have no numbers on the injector duty cycle. I am merely guessing I need bigger injectors based on all the searching I did and people almost maxing out stock injectors with bolt ons and a tune. I am looking for injectors that will work with a TBSS intake manifold and TBSS fuel rail as that is the next thing I will be throwing on along with a 3200 stall. I wast to get this all done and have Texas Speed and Performance do the tune as they are local to me and can run some live data logs and get the tune down with all the new stuff. From what I have read the 8.1 truck injectors might be enough but that may be pushing it. Then I was looking at the SVO red tops but don't know what mods I need for them to work with my setup. Then there is the 8.1 marines but wow they are plain expensive! current mods-Walbro 255LPH Comp Cams 218/224 562/567-114 ZO6 yellow springs 7.4 hardened push rods zippytune 160 tstat Pacesetter LT's 3" Spintech true dual exhaust Transgo HD-2 Shift kit corvette servo 05 efans Volant CAI

Hopefully everything works out for you. I hate stupid people!

Love em! I think these pics just made up my mind.

Bracket has been sold and engine covers are gonna get sanded and painted black with some true fire on them. Haven't decided if I want blue or red fire though. Probably be back up for sale after that too since like I said I plan on using the TBSS manifold. No pics of it installed since I still need an X link.

If anyone has installed pics I'd like to see them. I've been contemplating these same headlights.

I plan on putting them up for sale. Just gotta search and see what they go for. Anyway here are a few quick pics I snapped on the truck

It's a real SS. Just messed up the driver side a bit so decided to replace em all.

And yes I did prefer them in this style badge, guy who makes them can also make exact factory replicas but I didn't think they would look good in 4the pieces that had a stainless border. He also does them in full mirror stainless, black mirror stainless, the style i have now, or any combination of the above mentioned. I'd give a link but I'm not sure if that is frowned on here since they aren't a sponsor.

Been a member here since begining of this year but haven't posted much due to alot of my questions being answered my searching. Anyway I purchased "wopc69" old truck and haven't changed much Besides a Volant CAI and Spintech dual exhaust replaced the Flowmaster that was on. Got some parts sitting around but those posts will come later with installs. Anyway I ordered these badges last week and could not wait to throw them on! I think they look good. They are mirror polished stainless steel with etched centers, look kind of gray because of the lighting but they are more of a flat black.Tomorrow I will get some day pics of them installed. Until then here are some teaser pics.

Just noticed I posted the same pic twice and fixed it. Anyway I honestly have no idea what to sale the covers for. Message me an offer.

License plate bracket is for sale since I shaved it off from my truck. No hardware, black in color. $30 shipped Here I have a set of carbon fiber engine covers. Purchased them as is in hopes of cleaning them up and reclearing them. They have some fading that needed correcting but I am not a carbon fiber guy so I gave up since I didn't know how. I probably won't use these since I have a smoothed TBSS intake manifold I plan on painting and using. Driver side is best looking piece abd passenger side is worse. Still not sure if I want to sale these so I don't have a price in mind.

Looking for an aftermarket intake tube for my brother in laws 99 Sierra. Let me know what you got. I already searched Ebay for a cheap one to no avail. I'd even settle for one from the Ebay CAI.

Thanks! Love this board! You have been a great help.

Does the gas gauge zero out all the way to the left too?

Thanks! Everyone that does writeups already had them zeored out and just mark them.

So before I pull it apart should I try to find the spot with the dead stepper motors and mark it for the new?

So they actually will have a stop or they will just have a rough spot there at the beginning signifying the beginning?

So I plan on changing the stepper motors on my gauge cluster because it is tons cheaper than sending it off. Anyway all the write ups I see show the needles already zeroed out so they can put tape down and mark where the needle was at. On mine the needles have been long dead and never zero out. Tranny temp gauge stays pegged and tach will be real jumpy but never goes below 2k. How would I go about knowing where to put them back to where they are supposed to start?

I was looking at a 3200liquor on an f-body board I'm a part of which is why I asked. I dont wanna get it if it's gonna stall too high.

Looking at getting a stall for my 03 SSS. I'm really clueless as to what stall speed to get though, all I really can confirm is I will probably get a Circle D based off of price and I cant justify an expensive one for someone who doesn't hit the track that often. I know I will need a tune and trannyI cooler also but texas speed is an hour and a half away so that works fine for me. Anyway here is a mod list I copied and pasted. Let me know what you think. Mods:Walbro 255LPH , Comp Cams 218/224 562/567-114, ZO6 yellow springs, 7.4 hardened push rods, zippytune,160 tstat, Pacesetter LT's, 3" Spintech true dual exhaust,Transgo HD-2 Shift kit, corvette servo, 05 efans, 145amp alternator

Did you go straight from the alternator to the battery or did you go from the alternator to the red box then from the box to the battery?

Wanting to do the big 3 wire upgrade on my truck but since it is my daily driver I need measurements of the wire so I can order and put it together. Makes it easier for me this way the truck has little down time and plus buying the wire online is tons cheaper than buying it at a local shop.