BSER

Sorry for the delay guys the roll pans are made and will ship out next week. We had a bad storm and our building was flooded so we are just now getting things back to normal.

I have to have the order in by June 30 to garantee these prices. I haven't recieved the new price sheets yet. You can contact me at 316-858-1197 if you want to place an order or ask any questions.

If yours isn't molded it sure looks smooth,you can't even tell where they meet!can you? <{POST_SNAPBACK}> If you look closely you can see the seams at the edges.

Ok guys...here the prices: X-2000 with Stainless Steel hinges, electric light, carpet and electric locking (w key fob) Retail = $1287.90 GP price = $999 X-2000 Speedstur wing lid with Stainless Steel hinges, elctric light, carpet and electric locking (w key fob) = $1050 Retail = $1363.15 GP price = $1050 Traditional Spedstur wing lid with easy grip clamp on system. No light, carpet, electric lock or x-2000 hinges Retail = $1045.88 GP price = $865 All lids come painted to match your truck. None of these prices include shipping. The X-2000 comes with everything as part of the package. You can add any of the options of the X-2000 to the traditional lid for an additional charge. Shipping will be average about $130. It is better if you pay freight collect for two reasons. First it's a little cheaper, second it allows you to see the lid to make sure your box/lid isn't damaged. It's much easier to refuse the shipment anbd get a replacement rather than taking possession then resolving the problem. Shipping problems happen rarely but they do happen. I have all the lids I order come with a paremiter wood crate which solves most handling issues.

That's true they don't have to be molded in-mine isn't. Most roll pans are prefitted then painted to match your truck. I think most guys are getting it done for around $150 or so. Then you can install it at home or have the body shop do it. If you mold it in .....NOW you're talkin some bucks. You have to fit and mold in the pan, paint the pan on the truck (more expensive) and repaint the rear lower body cladding.

Thanks guys I have enough orders to get started now. It will probably take about 2 weeks for you to get your roll pan so be patient, it will be worth the wait. I will continue to take orders for this run through Wen. I will close this run then.

Yes, a new mold ---exactly like the old mold ---you won't be able to tell the difference between roll pans from the old mold and the new mold. In fact 2 of the last batch came out of the new mold and you can't tell which is which except we had to do more clean up of the edges on the old mold pans. The reason for a new mold is purely on my end. The pans are becoming hard to pop out of the old mold and the edges are getting ragged which causes the roll pan to not release from the mold.

The roll pan is exactly the same the new mold is just because the old one was wearing out. And I think the hitch question was answered nicely...thanks guys. I have fiberglass pan; the steel one is what we made the molds from. You can pm me or call me at 316-858-1197.

I have 2 orders for roll pans at this time. I need a couple of more to start this batch. If you are interested they are $335 with shipping. I accept paypal and MC/Visa. You can contact me at 316-858-1197 if you have any questions. Bob

Yup, holty got the last one I had made. If you want one pm me or call me at 316-858-1197.

Can you imagine the boxing and shipping costs on a one piece wrap around pan I costs about $30 to 35 to ship and $15 per box now. It may actully be cheaper to ship puffers 3 piece set since his can go in a shorter box my pan is considered over size because of it's length.

Don't get so worked up guys It's a personal preferance thing. They both look better than the bumper. I will put a plug in for mine though...finishing and installation will cost less. And my price includes shipping. I think I will probably just make them less often now....no problem for me. In fact it should make things a bit easier on me since I'm a one guy operation on these. Puff seems like a nice guy he even emailed me to talk about it. So just enjoy upgrading your truck...choice is allways a good thing.

Seems a fair price for a 3 piece set. And yes the set up and mold cost are rediculous. I didn't tell my wife how much it cost either. This gives everyone an option...choices are allways good. I will still make mine for those of you who want them. Mine is less expensive ($335 including shipping) but it is a one piece unit. I will only make them in batches though so it may take me longer to get them to you. Now if we could only combine the 2 for a wrap around one piece seamless pan... But talk about expensive

I have one roll pan made and ready to ship. Someone was unable to pay. First come first served...and you don't even have to wait for me to build it this time....

Not bad at all. If he can sell a quality pan for less I'll stop making mine. The only reason I have been doing it is that you guys drive me nuts until I make another batch. Every time I say I'm not gonna make them anymore I get a lot of paniced messages...can you just make one more Maybe he can turn these out faster and cheaper. It's really not gonna bother me if someone else can step up to the plate and do the job. This was never about the money for me since I don't make much from them. I would like to know what the concensus is though. I was about to make a new mold because the old one is about worn out. I don't want to go to the time or expense if someone else can do the job. Thanks, Bob

If you haven't figured it out this bactch is done. I have no idea when I will have enough orders to make more...that's up to you guys. If you ordered a roll pan they are shipping out today. Sorry for the delay; I have had the pans done for a few days; just been so busy haven't had time to box em up and ship them out. Be watch for the FedEx guy

Cut off will be Monday night. phone is 316-858-1197 Repair hmmmm!!! not sure that would be the right choice. If you want to have it repaired I would reccomend going to a local shop that does fiberglass. Most body shops could handel it. Sending it to me; paying for repair and return shipping would kill ya. Bob

Most guys go with lighted tag bolts or a lighted license plate frame. You can get both from Stylin Concepts.

Youcan expect about $20 more for Alaska and Hawaii...fuel surcharge kills ya. About $40 more for our Canadian brothers...the government has to get their share.

You can keep the spare but it doesn't look that good. I got the relocator and it still hung down to low, so my spare is in the garage, I just throw it in the bed if I am going out of town. The cost is $335 including shipping. Yea, I know it's expensive but try having one made from scratch...no one has been able to get a bid of less than $1000. Since they are made one at a time and not by the thousands they cost more to produce. They are much heavier fiberglass than what you see in a mass produced roll pan. You can't use your stock hitch; you have to use a hidden hitch. You have to get a fold down license plate holder if your are gonna tow. For a tag light guys use a lighted license plate frame or lighted tag bolts. Stylin Concepts has all the parts available. You can find them other places too. The pan is easy to fit and install by any quality body shop. So far no one has had any real problems getting them installed. There can be some slight fitment issues at the ends since every SS is a little different. Most guys end up having to remove a little material at the end of the roll pan to get a perfect fit. One guy did take it to a body shop that trimmed it to much and had to do a lot of work to fix the mistake. I think that covers the most common questions. I accept MC/Visa and paypal. I can be contacted at 316-858-1197. Bob

OK, FESS UP WHERE DID THOSE TIPS COME FROM? I know where you got the pan, since I made it, but those tips rock....I need em bad.

All you need to do is enlarge the pic on summit and youll see it won't match up to the SS clading. It will fit; It will look like however because the cladding sticks out like a sore thumb. That mistake has happened before and you'll have to pay shipping and a restocking fee if you send it back.

let me know how the acution goes....I've been considering putting them on ebay but then theyt wouldn't be a exclusive to this site.

I can be contacted at 316-858-1197. I accept MC/Visa and pay pal. Glad you like the roll pan guys.

Yup, you guys are right it does take a lot of time to make one and I sure ain't gonna lose money. My pans are about twice as thick as a standard mass produced piece...plus i'm still the only place you can get one. I am making another batch in the next week or so if I have enough orders. Right now I only have 1 confirmed order. Let me know if you are interested...I need at least 2 more to get started. Bob