-
Posts
34 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by IndyNova
-
Just swapped this on mine.. Would def like the honeycomb lower and brake ducts
-
AWD to 4WD swap, need help.
IndyNova replied to DatLiftedSS's topic in AWD, Differential, & Transmission Tech
If the 261 is the one with the floor shift, then yeah that would work. It's the ones with the electronic shifting you want to stay away from -
Suspected transfer case problem
IndyNova replied to dyocis's topic in AWD, Differential, & Transmission Tech
By front axle, I'm assuming you mean the CV joint. If that's the case, yes, you can still drive with a broken axle(wouldn't recommend that) The transfer case is chain driven off the input shaft from the transmission, through a chain and out to the front through a viscous coupling (hence why you never want to drive or dyno with the front driveshaft out. I actually smoked my output shaft on my transfer case this summer (that clunk everyone said was chain slap, was not..lol) The transfer case in our trucks(AWD) are full time AWD, and doesn't act the same as a normal 4x4 case -
Suspected transfer case problem
IndyNova replied to dyocis's topic in AWD, Differential, & Transmission Tech
They will roll, you have to chock the rear wheels. Mine seems to always roll if parked on an incline and the front wheels are off the ground. You would think the transmission being in park would prevent this -
AWD to 4WD swap, need help.
IndyNova replied to DatLiftedSS's topic in AWD, Differential, & Transmission Tech
You'll have to get a manual shift transfer case, and make some custom brackets to switch from 4x4 to 2wd. -
Braided transmission lines
IndyNova replied to twiztidss's topic in AWD, Differential, & Transmission Tech
I was going to make my own as my trans is out now for a rebuild, But that Glen's kit is about what I'd spend doing it myself, so I'll go that route. Yeah with FB, it seems the days of pages like this are in the past unfortunately -
Valvoline makes a Multi vehicle transfer case fluid that's pretty good.
- 1 reply
-
- requirements
- awd
-
(and 3 more)
Tagged with:
-
Found the crack on the passenger tube, swapped it out with a front diff from a denali..Back on the road
-
So my nightmare summer with my truck continues, after going through a transfer case, new brakes all the way around, new rear drive shaft, new suspension..And multiple tows home.. I lost the front U joints on my front driveshaft and consequentially bent the drive shaft and broke the header..New driveshaft made and installed and drive it to check it out.. Everything is fine, get it back home and shut it off.. then suddenly the front differential starts pissing fluid on the ground ?.. Haven't looked at it since, but I'm guessing there's a hairline crack that expands when it gets warm and leaks fluid. What front diffs swap over? I know I'll need to switch the gear set to a 4.10, but hoping I can go to the yard and pull a diff from another silverado/sierra/escalade etc. Any help is appreciated.
-
Have you used a meter to see if there's voltage present on the points on the board?
-
Check the bulb for correct orientation.. led's will only work one way
-
How to install your Fog Light wiring to Factory Switch
IndyNova replied to SSmoothSilSS's topic in How To
What LED's did you go with? -
how much?
-
3/5 on coilovers still ok for a DD Awd?
-
About to purchase an 04 AWD SS, want to upgrades ASAP, HELP!!
IndyNova replied to MarcusU's topic in Off-Topic/General
Well you can do a cam swap, but I would suggest doing the trunion upgrade on your rockers while your at it... Speed engineering has great headers for cheap.. Plan on getting a converter if you cam it though. -
I converted all my interior lights with LED's from Autozone, I believe they were Phillips brand.. Love the light output vs the halogen lights
-
speed engineering makes an xpipe kit that's easy on the wallet
-
I was around back in 08 (Still can't find my old account though) and this place was killer for mods and info.. I hate fb, but it seems that;s the way the car/truck community is going towards.. still like all the old how to's etc. om here.
-
What heads are you running?
IndyNova replied to Ragnarok0451's topic in Engine Tech And Modification
I'm going with the 243's and TBSS intake. -
Original NVG149 to 4L80E Input Shaft Adapter Group Buy! Cheapest P
IndyNova replied to Time2Kill's topic in For Sale/ Wanted
Still available?- 56 replies
-
- nvg149 input gear
- 4l80e adapter
- (and 5 more)
-
I would be in for some SS Decals.
-
do it yourself and save $$$
-
Anyone got any pics of these on an SS? They look siiiiiiiiiiiiiiiiiiiiccccccccccckkkkkkkkkkk