CenWaSS

If I go with the 2.75 pulley, looks I could be in the 9-10lbs range. Would that amount of boost be ok on the LQ9, I have no internal engine work...basicall all bolt ons (see sig).

Great info, just what I was looking for

I am currently running a 3.0 pulley and making 6lbs of boost. I do have a 2.75 pulley and am considering putting it on but was curious how much things would change with regards to drivability and of course how much more boost could I expect?

Sounds sweet, music to my ears Ill probably be adding a blower cam next year, wifes already mad about the radix.

I just installed my radix w/3.0 pulley too Im able to spin all fours but just a little, basically just off the launch (2ft of so).

Looks clean Very nice!

"Spring bump" ttt

Damn I got a Pm and opened it what was I thinkin

Yes your right, the tank was dropped. Ill check the evap lines. Thanks for the help.

Ever since I got the radix installed, about once a day after about 10 minutes of driving I get a chime/message to tighten the fuel cap. Of course the first few times I checked the cap and all was tight. I just ignore it now as it only does it in the first 10 min of driving, though I figured Id ask see if or how I could remedy it. Another issue I have, again right after the radix install, is my heater wont get hot unless I turn the heat up to 90 deg, then it gets too hot. Anything lower than 90 deg the air is cold Any ideas? Thanks for the help!

I'll be working that weekend, the following weekend we have a good size car show (easily 50 plus cars), carnival, parade, etc, its our towns big bash/spring festival. We definatley need to have another GTG on this side of the mountains, wheather is getting super nice (sunny about 60ish today). Last time we had a gtg I forgot about the little car museum we have, its a must see has about 25 to 30 cars.

Seriously????? Cam that bish out

Ya I'm thinking this may be the issue. My A/F gauge only reads 10.0 so Im lower than that, I read a 10.0 even when at 1/2 to WOT throttle. I've got another leaner tune coming, should be here this week On and now my engine light is on, throwing cat code for loss of efficiency or something like that?

That sucks man, hopefully everythiong works out and make that MTF PAY!!! On the other hand, good excuse to get a role pan Something similair happened to me a couple yrs ago although the lady left a note on my windshield with her name and number There are still some decent people in the world

Thanks, have a pic by chance?

I've got the x-link and am wanting to install it with my LS2 90mm TB. The x-link I have only has one pink wire, Torque Rush says to connect the pink wire to a 5 volt source. Anyone know where the closest source would be? Thanks!

Yes, before the radix.

What sort of gains could one expect from just adding an LS2 TB and x-link?

I see Rainer every morning from my front window, awesome site...definatley a must see .

14.2...not bad for the full size tundra

I've got a tbtc currently and recently installed a radix. My question to all you with tbtc (and those who are also radix'd) did you notice a difference on the top end? Good or bad? Did your trap speeds increase or decrease. With my tbtc (and LT's) my 60ft improved from a 2.1 to a 2.01, et's from a 14.39 to 14.15, but traps stayed even at 95mph. Now that Im blown, 1st and 2nd gear pull nice and falls flat in 3rd, convertor is unlocked as well? When I say fall flat, I mean once in third gear I could not pull away from a 5.3L 2wd truck running 14.1's, he wasnt gaining but still, wtf? Any ideas?

Wish I could afford good luck

Man those stingrays look sick Ive been torn between the singrays or millineum (sp?) edges in 22's of course. Did you happen to weigh them after the wheels were mounted to the tires?

AWD, wish I could do burn outs though...oh wait I can needed AWD so I could tow our boat out of the launch.

There's a black Z71 "55" running around my neck of the woods also everytime I see it just makes me laugh...Im sure they dont have a clue. Then again their probably laughing at me cause their thinking my badges are upside down