Simon

What about you? You seem to have a pretty big cooler there

Just the turbo for now and a tune to go along with. Do i really need those at the same time or can it wait a little bit? I will most likely put a zippy kit at the same time...

I'm pretty sure i will go with the STS turbo special from TBYRNE. As i read in the forums before it seems like the GT-67 is the right upgrade for the SS What do you guys think about that? I plan on doing the install myself except the welding... The truck is a daily driver Any testimonial would be appreciated. Simon

I did the Belltech 2/2 drop with the torsion keys and rear shackles. I got better handling since the truck is lower. Nothing overwehlming though. People say it'better with spindles and i believe that. Too bad I didn't know this forum before I bought the kit The truck looks good though

Belltech 10018 and 10572 is what i have along with their lowering kit and it's a lot better than the stock ones!

I finally completed the Belltech 2/2 drop kit 103BLT took 2 months though to get the good set of shocks but the are finally in place. I lightly snapped my finger as well!!! but all i can say is that they are alot better than the stockers! BTW thanks to Eric at Belltech for telling me i had the wrong set.

Hi I'm new to this forum and I've been reading a lot these past weeks. Lots of helpful information . Ok, I bought a Belltech 2/2 drop I replaced the front torsion keys and the front shocks. Changed the rear shackles and the rear shocks. The rear was sitting lower than the front so I had to turn the adjutment bolts all the way out wich gave me a poor quality ride. It was ridiculous, the rear shocks were stiff like bars. I had to put back the stock shocks in the back to get a decent ride. One shock was blown when I took them out. Just received the new set on guarantee from Belltech but they seem to be the exact same thing than the last ones. Except that they gave me a stud wich goes through the upper mount and it's designed to fit only on one side of the vehicle's bracket. My feeling is that they gave me the wrong set of shocks for the rear and it's designed for a heavier truck...parts number for the front is 10004 and the rear is 10506. Any suggestion would be greatly appreciated!