EmergencyVP1

So very sorry Tim, you and your family are in my prayers...

I have one on the plastic cover over the top of the radiator/grille area, then another inside the truck under the pass seat airbag switch....

Does anyone have pics of the JDM clear or black turn signal lenses on their truck? Im thinking about getting a set off Ebay...Thanks , Jason

Older topic, but I just installed the Belltech Nitro Actives last night and they are great (course I still had the originals on with 42000 miles)....Installing the Toxic's tonight, will post results...Jason

Did you check the U-joints on the driveshaft?? If the rear U-joint is really sloppy, you will hear a clunk noise going from park to drive gears or Neutral to drive gears...

No need for the the bump stops, just take a box cutter or knife and cut one notch from the bottom of the stockers...As for the rear, I did not cut any out yet...Have had no problems

Sounds good...I thought there was a option in the DIC on the truck, but maybe im wrong...Thought there was one for flash parking lights or headlights or both...I'll have to check, otherwise I'll need the Astrostart checked....Thanks, Jason

What do you think of the lights, have you tried them at night??

I have a Astrostart system on mine...The headlights flash twice pretty quickly for confirmation on setting the alarm or unlocking...

Such a tragic loss of young lives....The innocence of being young slowly fades away year after year, tragedy after tragedy...

Kinda off the topic here, but with HID's, do you need to shut down the headlight confirmation flash so the lights don't do a quick flash when you lock your doors or set the alarm....?? Will this cause them to burn out quicker or cause damage to them?? Sorry to hijack....but maybe this is something that is causing quick failure in the HID's

Good Job!! Wish I could quit Skoal....I used Skoal about 7 years ago to help wean me off cigarettes and im still on it...Used to smoke 1 pack a day and it was hard for me to leave dispatch to have a smoke. So I thought Skoal would help me with the smoking...I have heard the nicotine levels in chew are comparable to 3 cigarettes...

I'd be in for a dual display (maybe 2 depending on price)....Thanks Frank for setting this up...I know you've been swamped !! Jason

I have not had any vibration issues, have had the truck up to 100mph and smooth sailing....

I just order the Belltech Active Nitro Drop shocks for the front and the Toxic Drops for the rear...We'll see how the ride is after these are in compared to stock...And stock is pretty good....

I had a post on the board here about 3 weeks ago for a GP on the Aeroforce gauges....At that time, there was 4 people interested....I'd be in for sure !!

Awesome deal...Just ordered a set (emergencyvehicleproducts), 6000k ......Let me know if you have any questions....Thanks again, Jason

I have a '03 and installed the Belltech 2" drop spindles and 2" Belltech shackles about a month ago...I love it, only wish the rear was another inch lower...But the ride is just like stock, have had no problems with it...I would not go the torsion key way....And stock shocks are just fine, unless your needing replacements....I believe the part #'s are 6400 for the spindles and 2508 for the shackles. Go to Belltechs website, get the p/n's then order through Summit, worked good for me...Jason

Good find, I almost ordered one last week for $24.00.....Thanks, Jason

Yeah I would like to see the truck, and I can bring that shroud over also....

Where did you get your corner lenses from, Im looking for the matching set to the headlights...

Condensation is a common problem with LED lighting. We have problems with our customers police and fire dept. lightbars, the LED's normally do not produce enough heat to burn off condensation within the housing...Some manufacturers have vent areas for larger LED's (that do produce heat) but this normally makes the condensation worse. Depending on the size of LED in your lightbars, and IF it has a vent, I would try to seal with silicone. The smaller LED's will not create enough heat to warrant a vent. But if they are the larger (1 watt) LED's or have a magnifier in front of them, you may want to check with the manufacturer before sealing....Jason

Thats a bit steep for those headlights, I just bought the same ones used from a guy off PT.Net for $85.00 and included 3 sets of bulbs...I can't remember where I saw them, somewhere on the internet for $119.00 or so...If I come across I'll send you a PM...Here's a pic installed....

No problem, let me know and I will get you the shroud this week...Im around in the evenings...Jason

No trick questions here...Just wanted to see what everyones opinion is on TQ's for a Radix setup....No towing with the vehicle, mainly daily driver and occasional strip (maybe 3-6 times / year) Thanks-Jason