jtmarine02
-
Posts
240 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by jtmarine02
-
-
Now that you mention it, I did just replace me Red top with a NEW Yellow top battery. Maybe the BCM reset itself...? I'll give it a shot. Thanks man!
Alrighty, I have no idea what causes this but i will let you in on what happened to me. I switched out all of my exterior lights to leds. My cruise stopped working.... i spent probably 2 hours troubleshooting and gave up.
Then i got a re-tune, installed the new computer and it worked again. I hypothesize that some kind of signal was crossed and when i disconnected the battery and something, maybe the bcm reset itself. So... i would try disconnecting your battery for a little bit and see if that helps. 
-
It's funny when you come across a fake SSS driving in your REAL SSS and they look away or drop their head down like if they were saying "Damn a real one, you caught me!" Had that happen a few times.
-
I do not have any electrical wiring near my speed sensor, and my brake lights work fine.
-
Welcome and great looking truck!
-
The light isn't working but its because the actual cruise control isnt working.
Is it the light that is not working or cruise control its self? If its the cruise control its self I'm not sure what LEDs would have to do with that? I'm curious.
-
Yes but, it worked after the install and stopped working all of a sudden about 3 months later (now)...?
have you by chance been switching to any led bulbs lately?
-
What's up guys, so like the topic says my cruise control is not working at all. I've looked in the manual and checked the fuses and have found nothing wrong there. Is there another relay or anything else I could be missing? Thanks ahead of time.
-
mazing looking Vette, I want your job... lol The ony thing I thought didn't fit well was the color of the exhaust tip, but that's just my opinion! I'd still take that vette in a heart beat if I could afford it:pepsicheer: !
-
I did my buddy's stock radio in red LED's, not hard at all. Just remove the screws and pop off the covers, then make sure that the cable connections from the face plate to the radio are removed before removing the face plate. Also, to make it easier to know what terminal is Positive, take voltage readings with the face plate connected and label them as you take the reading. You'll have to double check on the lenght of the LED & attached resistor cause its a tight fit in some cases.
Anyone done the radio and overhead consoleyet? How hard is it?
-
Great Kill! I always get people getting to race my SSS especially the Nissan or toyota guys!
-
What do the kits run? What did you get?, what did it come with? How much? Just wanted to get a bit more informed on the matter.
so last night I started my new Adams kit, started out with the shampoo damn that stuff smells amazing and cleans awesome. The clay bar... Just wow, my truck is pretty rough said the clay bar. The results were amazing. I only started the front end and I can feel a huge difference... My truck has never recieved this kind of treatment. Pix to follow later on once I get a little farther in the kit. Thanks Adam and dylan.
-
very nice looking truck! Congrats!
-
PM sent
Got a couple of leftovers from my truck so i figured maybe somebody could use these. Everything is Best offer
Nice set of rear bumper brackets off an 04 SS i took the cladding from, these are the ones for the corners of the bumper, with nuts and bolts.
I also got a airbag switch, looks flawless. Got it with an SS dash badge and never used it cause i got an 07, so cant gaurantee if everything works, but i dont see why not. And the dash cubby hole where i put the SS dash badge. Also in very nice shape.
-
How about some pictures of them????
-
Thanks man, you really helped me out! Looks like I know what I'm doing this weekend! As for the electronic flasher relay, that's great info! Should help out anyone out there who is looking at doing this! Even me if I ever need to replace the resistors.
you can use the stock location from the 99-02 trucks/suvs for the floor lighting , the brackets are still there , i did this and tapped into the wire so you can dim them and turn them on with the switch on the stock dash .
another thing you can do is get a dome light from a tahoe for the rear passenger overhead that has lamps with buttons so they can use them as well , this is plug n play with the addition of a constant 12v source . i did that as well as adding the homelink in my overhead console that needed a 12v source .
i did hyper white for my interior bulbs since you actually need them to see , the rest of my interior is blue led ( all the factory gauges/a/c cluster radio etc) im adding a touchscreen nav from an escalade with the 6 disc in the lower cubby in the bottom of the center console like the escalade has stock and it will all be wired as stock with the addition of the lux amp to get more bass from the bose system.
you can also not add resistors to some of the trucks and get a electronic flasher relay for the earlier trucks depending if you truck uses the lm487 flasher it looks like this
its located in the driverside knee area , near the ebrake and bcm , just turn on your hazards , unbolt your knee area lower dash cover and follow the relay click. that will determine what e-flasher you need , imo this is the right way to do it if you ever need to swap back its as simple as swapping bulbs.
-
Yeah my Low/High and fog lights are all 10000K HID's. If you want a near perfect match go with 8000K HID's. My 10K HID's are a close match.
What are you using for headlight bulbs? Are they HID's ?
After doing the swithcback turn signals, I noticed a difference in color between the stock headlight and the new marker lights and would like to match them up.
Thx
-
Amazing cars! They dont make them like they use to... Glad to see that they lasted!
-
you should use an exacto knife to cut the OEM film out, and have it to where it is just the blue gel sheet . Worked for me.
FWI, I put dark blue gel sheets in mine and I have to take them out, too dark, I can't see the displays in the daytime.
Don't use one really dark like i did.
-
Im actually in need of stopping by at your 9-5. I need to rotate my shoes.
Looks great man. I'm going to have to stop by and check it out soon.
-
Sick bike, thanks for the pics.
-
Read reply #11 above, I answered that same question. If your unclear or have questions about the items or sellers feel free to ask.
where are you getting all these from?
-
Thanks.
Those are very cool. -
Read reply #11 above, I answered that same question. If your unclear or have questions about the items or sellers feel free to ask.
Looks Good, I have the same color interior lights. I only have one right now but thinking about adding a second one
I had some Blue LEDs in my reverse lights too, they looks awesome but they were not bright enouph and it was hard to see backing up. Those are really bright though
Where did you get those LEDs?
-
Here are the last set of pictures, for now..., of my interior dome light upgrade-
Please feel free to comment or ask questions if you have either.
Lastly,I plan to add blue LED's to both the gas/brake pedal area and the passenger footing area, which I'll wire to be able to dimm with the dimmer switch.
Engine Ice
in General SS
Posted
I actually got a FREE bottle years back, I think 2007, right about the time I left California. I got it at a car show for free as a gift for a promotion they were doing. I still have the sealed bottle, and recently found it after forgetting about it since i got it... I was, and have been, skeptical about its' actual performance, hence the sealed bottle... lol Give it a try and let us know if it works and how it works. Or I can sell you the one I have, I can double check that it hasnt gone bad...?