rudy91040

Wish I could help but never had anyone ever put them on anything smaller than a 20” wheel.

Good to know ?

Already replied

All the part numbers and info are in the how to section.

Ray doesn't make them any longer. With his permission I'm carrying on the torch so to speak. Feel free to drop me a line at [email protected].

Just sent you an email.

Unless something has changed from the Camaro caliper I used for mock up years ago, those calipers will hang way off the edge of the rotor and I believe the offset was off too. Its been a few years since I looked at it so I could be wrong. If someone could find a rotor that was a bigger diameter and a different offset, its possible to make it work. But I'd guess it would probably have to be at least 17" or maybe even 18" diameter. I don't know if anyone even makes a rotor that big.

just sent you a pm

Sorry for the delayed response. I was out of town. I just replied to any emails. Check your inbox

What vehicle is that caliper from and have you ever had the whole assembly (spindle, rotor, caliper, pads, etc.)?

Im curious what Brembo calipers bolt up to the Z06 brackets. More info and pics please

If you can get a hold of Ray, good luck. Last I heard he wasnt responding when I sent people his way to buy rotors. Hope he is ok. He is a good dude.

I still have some left. Email me [email protected]. Just FYI, you wont get the group buy price. I gave a discount to all the people that prepaid and waited a month to help fund this batch.

All remaining brackets were dropped off at the post office today. If by some chance you didnt get an email from PayPal with your tracking info, please let me know. Thanks for making this happen to all the guys that followed through and kept their patience.

Brackets are being boxed up and start shipping them out tomorrow gentleman!!!

Good news!!! Our shop driver is on the way to pick up the brackets. Should have them in my hands by this afternoon!!!

Brackets should be done by tomorrow. If they are, I will start shipping them out.

Sorry to hear you are having such issues. Not sure why there is such a problem with the braided lines. I think you are the first person I recall of using Stop Tech lines. I believe Russel was the most popular from what I remember. Sorry to hear you had such problems with trimming your dust shields. In Step 4 of the rear bracket install I mention trimming the dust shields or removing them. You are the first person I've heard of that has had such a problem. Do you mind posting some pics and details as to what the issues were?

Little by little guys are getting back to me. If anyone else wants to join before the July 11th cutoff, let me know and you can still get in on the group buy price. [email protected]

From what I personally saw and can remember years ago, Belltechs did not have any major problems. There was a little excess material from casting that needed to be ground down to make the whole mounting surface level. The distance from axle center-line to the factory caliper mounting points was really close to the stock spindle. The McGaughy spindles were the problems. The distance from the axle center-line to the two mounting points for the factory caliper mounting bracket were farther away, pushing the caliper farther off the edge of the rotor. Also, the two holes were different distances from axle center-line in relation to each other, causing the caliper to be rotated or clocked and not perpendicular to axle center-line. I don't know if anything has changes with them. This was many years ago I measured and mocked them up to see the difference. There have been some people that slotted the brackets and their drop spindles to move the caliper closer but I can't advise doing that.

I started sending out info, releases and invoices. If you are on the list or still want to get in on the group buy send me your info or email me. [email protected]

They dont work with some drop spindles.

As long as you are stock suspension, factory disc brakes and a standard 10 bolt rear end, you should be good. They do not work with any other calipers than the Z06 or Grand Sport calipers. If you see anyone post otherwise, please correct them and ask that they stop posting false information. Unfortunately Ive had quite a few people that have already purchased various calipers and then emailed me about buying brackets. I have to be the bearer of bad news and tell them they wasted their money buying calipers that wont work.

Yep. I havent collected money yet. I can add you to the list. You want front and rear?

Ok ladies and gentleman. Just put in my order for raw materials this morning. It is officially happening. In the next few days I will be sending out info to each person and then invoices. Even if youve already sent it, please send me your email again.