chrishoekusmc

Thanks for the advice gents. Looks like if I do proceed I'll be rolling them.

I'm currently sitting on a 3/4 drop, looking to bring it down 1 more front and rear. I'm running 295s and have maybe about 1/8" of clearance now if that. It is hard to tell, but I know I don't rub. Just thinking I would like at least 1/4" of clearance for my own comfort. And yes, I'm only talking about the rear. I plan on using rustoleum if I go this route, then put my undercoat over that. Just never had to use the fender roller so slightly worried about it messing up my fender. Are they idiot proof?

I'm thinking about lowering my truck another inch. Still undecided but I'm thinking if I do decide to do it I would like to have a little extra clearance between the tire and the wheel well lip on the rear. I know I could either rent a fender roller or I can just grind it down then prime the freshly cut edge and spray my undercoating to make it match the rest of my wheel well. Just wondering if anyone has done either of these methods (fender roller vs grinder) and what your recommendations are? Thanks in advance guys. Chris

Looks good man. Lowering can be addictive, I've lowered mine twice and now I want to go lower.

When I bought my reps I tried to put my stock center caps on them and they did not fit so well. You might need to do a little more checking before you pull the trigger on this one.

Lookin good Alex.

Sounds great Jason. I'm digging it.

Let me know if you find a good source. I'm gonna be needing one too once I start my interior project. Can't believe you are selling your truck bro.

Yeah, I have noticed they are relatively inexpensive, I'd rather not have to deal with a body shop though if I can avoid it. I live in Florida, so we could potentially meet up somewhere if you change your mind. Just PM me if you have a change of heart, if not no worries, I'm gonna get one eventually either way. Good luck with your sale and future project.

Would you be interested in a hood swap, plus some cash? I've been wanting that hood for a while now. I understand if you don't want to, but let me know.

Thanks man. Got much more planned. I'll keep you posted.

Glad you liked it. Be sure to post some clips once you are done with yours. Good luck.

I have a similar setup but with Flowmasters. I have posted audio clips on here I'm sure you can dig up. It is pretty dang loud. If it were my dd I would find it uncomfortable. Luckily it's not my dd so I like it.

Welcome from Pensacola FL.

Welcome to the site. Where are you from in LA? I'm from Baton Rouge, but I live in Pensacola now. I'm actually heading to BR today, but not in the SSS

I'm gonna have to blame it on shoddy workmanship. Haha. Just kidding. I'm kind of thinking that since the problem has persisted that the problem might have been caused by the bump, not the water. Plus you are still breaking it in. I think you just knocked something loose. I don't know man, I hope you get it figured out though.

Here's one for $5.78 http://www.amazon.co...#39; hdmi cable I don't know if I would go that cheap though. Here's a bunch more. http://www.amazon.co...eywords=25' hdmi cable If that second link doesn't work just look on Amazon. Ok, nevermind, neither link works. Just do a search on Amazon for 25' HDMI cable.

Yeah, I'd say you would be really lucky if you could get 1500. The range I usually see is 800 to 1200. At this point it would almost be best for you to wait untill you need tires again then sell for around 1000. I know, that sucks. If I were you I'd do that trade deal you were talking about in your other post.

I would trade bro. 22s look better imo.

2K plus shipping... Good luck with that.

Oorah!

They are actually pretty damn strong too. I bounced a seagull off of mine at about 45-50 mph a while back.