Fors

Did not have to do anything with my gas tank to remove the rivets, used a sawzall and air chizel, took a while but it worked fine. I'm not sure how far my truck was lowered but I ran into issues down the line with passenger side cv axle always popping out so I had to have both mine extended.

Good question.

I dont have anyone to install the LT's for me, and I am not doing it myself for lack of patience dealing with breaking a bolt off in there or something. Uhm as for length of the mufflers, Im not sure but they are shorter than I expected. Ill have to get a pick up sometime after all these storms blow over.

Finnaly got an exhaust system installed by a local shop. Not sure what mufflers they are but they are magnaflows, true dual setup. Still not sure if I like how it sounds but I am sure I don't like that it feels like I have no acceleration. I did some searching and I've come up with that putting on true duals takes your low end torque? If this is wrong let me know. I do not have a tune as I do not live near any and also don't want to get a tune after every mods. Other than tune and cutouts can I fix this? Pics later, im typing this from my phone.

By far the best looking studda I have seen, gotta love that red SS chevelle though.

Well if no one has anything to offer you can always look here. http://shop.saeparts.com/category.sc?categoryId=10

Yup, got em on my droid x, always wasting my battery and time at work playing it or playstation 1 games on my phone. Productivity at its best.

Id trade my house for the car and live in it.

Agh ok he just sent out another saying it was a viruse and not to open it.....crap.

I just got an email from norcal with a link in it, I was wondering if anyone else got this? I went to click it and it opens up a no no adware type site that does bad stuff to your pc, Im too scared to click it again.

I made my own box for under my seat, IF I wanted a sealed box it would of been fine for my 2 Fi ssd 12's but I ported it and it doesnt even come close to my s10's Fi BL 15" so Im going to take one 12 out when I get around to it, should sound a whole lot louder. Nothing like having a bunch of spare audio parts in a closet though. So you should be fine with 8's.

The amp info aboutthe gain was informative, never really thought about it much even tho I dont have my gains cranked up anyways. Any particular brands you lean closer to when it comes to amps? Just needing 2 channels with plenty of power, still havent decided if I want the RE's and they are about the only component set that ive seen @ 2 ohms so the rest of the choices im sure are 4 ohms.

That bottom picture looks sexy I was goign to put some RE 6.5 xxx components in my truck since I found a good deal on them, Ive heard they are great for midbass but lack in midrange so I was going to just put in a decent midrange speaker to go with them but I wasnt sure if the midrange id pair them with should be same brand, same rms, same db ect ect so I wasnt sure what to do. These RE's are 2ohms @ 150rms so your saying I shouldnt even worry about rms or peak and put what I can on them?

Ok thanks, and maybe you can help me with setting up a 3 way active front stage, I know its complex to tune it per say but my friends dad is good with dealing with sound processors and such but I'd just like to know what all is required for a 3 way active. Tweeter, midrange and midbass. I read somewhere a 2 way active requires a amp for the tweeters and a amp for the midrange so does a 3 way require 3 amps? Also preouts on a HU for 3 way how many do you need and can you use rca splitters if you dont have enough? 3 way crossovers I assume are needed, is a sound processor itself needed? Do the 3 speakers need to be reletively the same xmas, rms, db ect ect to sound right?

On an audio forum I was browsing said they wouldnt use 2 or 3 ways in the rear with components up front, I'd leave theback empty but I just want something to fill the rear and even if I just got some 6 or 8 inch mid bass drivers they wouldnt fit either.

Is there a website that sells replacment door panels or speaker pods for these trucks or is this something that has to be made yourself? Im mostly just looking for a way to mount a set of components ( 6.5 + tweeter set ) in the back doors.

I'd be interested if I knew for 100% I was going, but I dont really see it feasible for me to drive there if gas is around 5 or more a gallon in may.

Wish I knew if Id have to use a wheel spacer for those calipers or not or I'd take them.

I'd just like part numbers or links to summit or something with all the stuff needed to do this upgrade, I've scrounged google and the forums trying to find this kinda info :|

Not to intrude but do you or anyone else happen to know a part number for the 05/06 front calipers?

Ive been thinking about some off ebay that look just like that only a bit cheaper. Just not sure how the black will look on a blue truck.

Those look good but im just now sure how theyd work out on a blue truck.