Mr.Scary

those look better than any reps ive ever seen.. lookin spiffy

http://www.superchargers4less.com/ss_silverado/images/intercooler%20mount.jpg

this is for an 08 but ours mount the exact same way http://www.truckinweb.com/tech/engine/0907tr_2008_chevy_silverado_procharger_supercharger_installation/photo_10.html

the rear bushing issue.. not uncommon. happened to me.. I had to pay a shop with a powerful press to press that bolt out.. took me two weeks to get just the rear part of the drop done.

its DEFINATELY the crossover tube dude. you do need to remove the alternator to get it off and back on.. or at least its 100000% easier that way. its a cheap fix.. the little gasket\o ring that's under there is leaking.. I went through the same thing..

http://www.ebay.com/itm/Helo-Hawk-Center-Cap-New-Chrome-with-NO-Helo-Logo-Part-N803-or-803-2295-CAP-/171281533979?pt=Motors_Car_Truck_Parts_Accessories&hash=item27e12ccc1b&vxp=mtr

this is a lo pro, but its NOT flush mount.. I already contacted him about it.

where did you find that cover? do they still make it?

dr. vinyl

I used a c camp to compress the torsion key, removed the bolt.. released pressure on the clamp then unbolted the arm, and removed it. the hard part is putting it back together, positioning the arm, and torsion bar\key so its in there correctly.

looking HOT Danny !!! Awesome job as usual!

wheel hub bearing...

sorry.. misread.. my hood is not a ram air style

the HPTuners forum has canned tunes in them.. there are some stock tunes in there..

I have one. where are you located?

good luck in getting the SS emblems on them.. you have to find a shop (if they follow.. the rules that is) that has a license from GM to do them. Katzkin wont even do them anymore as they no longer have a license with GM for it.

i know that.. i was just wondering HOW it goes on, excluding the fine finishing..

im out of the loop on this one.. whats the complaint??

i only know of one guy who did it, smoothed, and i know his.. shall i say 'secret'.. and in i think 5 years or so, hasnt cracked.. that said.. his was a special case i think..

ok.. first . .YES i did search.. i didnt find what i was looking for. anyone done a 'how do' for a basic install for a BSER pan? i ask because i havent taken my stock bumper cover and what-not off yet so i cant envision what the two bolts from the pan attach to. anyone got any pics to share on this part?

I LOVE THAT TONNEAU COVER.. well done

Progress pics getting some small parts painted.. got the suspension mostly done.. ill get more detailed pics later.. ill say this.. i hate cotter pins LOL i should have her off jack stands for the first time since this started this weekend, with the full 2/4 drop and new wheels\tires.

do you mean the lower ball joint or the upper ball joint? if the lower, use a jack to push the spindle up all the way, then try again.

check out brakemotive as well.. 209 for all four rotors, zinc coated, slotted and drilled.. and that's a shipped price.

I have the 06 calipers up front that's why I used that kit