paulguy

Looks like Black/white is ground on the amp and orange is power. Test those wires. My guess is if the wiring harness is long enough, that other plug goes to the junction under the dash to give power and ground

I thought that was a dealer only piece.

Well, the small white plugs look like a-pillar tweeter plugs, but i`m not sure about those other ones. I think your right when you say your amp isn`t getting power. I`ll post an amp pinout so that you can trace the power and ground to find out if thats what you need.

250 amp is alot of juice, I can't see the battery pulling more then that. I'm not sure if getting fuses for bigger then that is going to be easy anyway. I'm not a big fan of breakers myself. They fail. You didn't have room to put the battery where the aux battery goes under the hood?

I think I did a scytex starter/alarm years ago, and if I remember right, it's pretty standard as far as starter/alarms go. Should be pretty easy except for the window module, those can be a bit of work. If it was me I would probably just run the inverter off of the battery, it might help smooth out spikes in the current, but it probably won't matter either way. How much is a 1000w inverter going to pull anyway?80 amps? I use a solenoid between both batteries too.

Do you know whats even better?... 2 sets of hids with this mod!

some good info here... http://www.dieselplace.com/forum/showthread.php?t=54477

it should work without the amplifier, there's been guys that have bypassed the amp and they have sound, its just not amplified Sent from my GT-I9000 using Tapatalk

I've been installing professionally for about 16 years, and working on my own stuff since the mid 80's. Looks good so far

I've done one box under a seat with 10w6's(customers, not mine) and it hit really hard running off a 1000.1 I don't bd meter customers cars. It sounded good though.

There is no carpet back there, I mounted wood and carpeted it after because I wanted to cover all of the bare metal. But the easiest way is to carpet some wood, then munt it

Thanks. Glad I could help.

Cheers from Alberta.

Cheers from Alberta.

Welcome

Welcome Nice Dodge...(I think that's the first time I've ever said that!) At least its not a Ford...(F__king Owner, Really Dumb) hehe. What times are you running?

Any Update? Did you get it working?

My HCCA Orion does pretty good for now. 1200 watts @ 1ohm.

I don't remember the last box exactly, if i was to guess I would say the box was about '1 to 1.25', which is enough for the w6's and x type;s which are about .65ft. A little dacron and it's close enough. At least with the x-types, if I want more sound later on, I can run a bigger amp cuz they can handle twice as much power as the jl's. I just cut a hole and fibreglass over the magnets. Course with jl, you need that 3/4" space over the vent hole on the back of the magnet. But they're as deep as a w7, so I should just run those, but then I need a new amp for sure with the 3 ohm coils.

The math is simple.... 3/16" to 1/4" thick mounting tab on the amp + 1/2 plywood + carpet + silicone + 3 layers of dynamat(I use b-quiet) = what? over and inch. Probably 1.5" So as long as you use a screw less then an inch...no problem. This is truck country here, and I've put amps on probably a hundred cabs and as long as you use silicone that says 'good adhesion', scuff it up and let it set up long enough...no problems. In fact, I changed mine on my truck and I had to pull for everything I was worth to get the wood off, and I ended up sanding alot of wood off of the back panel. Insulation is just 3 layers of b-quiet and expanding foam in the rear b-pillars. Yep, rear seat fold down trick... http://www.silverado...old-down-trick/

There's no holes in the back of my cab

You don't have to drill holes on the back wall Just cut a piece of wood to fit between the rear panels behind the back seat, cut the insulation off, and silicone the wood to the back wall. let it dry for a couple hours...done.

I've done 10w6's without lifting the rear seat. The xtypes I think i can do too...but it's gonna be tight

Anyone replaced theirs? I took mine out and cleaned it..still makes noise. I wonder how much they are.I don't see them on the online catalogs

It the air temperature sender for auto climate controls And the motors make noise after a while.