foxySS

Yep, that was the culprit! Dipshits at the shop never reconnected the wire. Not just that they didn't connect it, they broke the clip that keeps it connected! Oh well, it seems to sit in there pretty well anyways, so I'm just gonna leave it that way. I cleared all the codes out and nothing came back. Problem solved!

I found a loose wire end coming out of one of the factory wiring routes right by the Power steering fluid cap. It's on the drivers side right in front of the header. Would this be for the ECT sensor?

ASM headers, 02's are good

I just took the bracket off and drilled two holes and bolted the front plate to my bumper.

Hi all, I'm getting the following trouble codes after an exhaust shop did the header install. The said they had to jack up the engine in order to get the passenger header installed. It looks like one of the codes is ECT, where is this sensor located? Any ideas on these codes? Diagnostic Trouble Codes P0118 "Engine Coolant Temperature (ECT) Sensor Circuit High" EPA ($10) "Powertrain Control Module (PCM)" P0118 "Engine Coolant Temperature (ECT) Sensor Circuit High" EPA Pending ($10) "Powertrain Control Module (PCM)" P0118 "Engine Coolant Temperature (ECT) Sensor Circuit High" MPHC ($10) "Powertrain Control Module (PCM)" B2961 "Key in Ignition Circuit " H ($40) "Body Control Module (BCM) or Dash Integration Module (DIM)"

Hey, one other thing. After I installed that video driver, my mouse is disappearing on the right side of my screen and it takes it forever to bring it back into the screen. I tried messing around with the Nvidia settings but nothing seems to fix that. Any ideas on that?

Thank you, thank you, thank you! I looked at my video drivers and didn't see any listed. Downloaded the latest video driver from Nvidia and Bam! We have Video! The only thing is, I have to do some adjusting for the resolution and screen configuration. It changed that around a whole bunch. Thanks NoLegs!

Do you mean in the control panel under system, hardware, performance and then advanced? I did that and didn't see anything for overlay settings. I already installed the klmcodec pack.

Okay, here's what I have.

Doesn't play with the VLC player either.

Sorry, forgot to mention- I already downloaded and installed wmp, tried wmp classic, and tried rolling back wmp from ver.11 to ver.10.

Hi all, not quite sure what's going on here. I recently had some spyware/trojan virus that infected my computer and then I cleaned them out, but now Windows media player won't show video. I'm wondering if maybe when I was removing programs in the add/remove if I accidentally removed something related to the media player? I've searched everywhere online, and most say that problem is related to missing video codecs. I installed several different video codecs (one at a time) and none of them seemed to fix it. Anybody have any ideas?

Very Nice Collection! My only suggestion is lowering.

Volant for me! My bro has one too. Very good quality and noticeable gains.

I thought you were gonna say: "Me neither, ha ha!"

cheater!

Does anyone know what type of grease they use? Does it have to be any particular kind? I don't see why it would hurt to add a little more grease to the shaft.

Looks Good. I don't know about 6" but maybe at least a couple inches in the back.

I think that seems about right.

Just a thought... Did you happen to descreen the MAF sensor? If you did, you could have hit one of the sensitive wires in there.

I think when I ordered a tune for my brothers truck from Jesse, I asked him about that (if memory serves me correctly,) and he said with the T/H setting he could only change transmission parameters.

Where did you buy the dual walbro cup setup from? Looks sweet!

They should. Most all headers fit 4.8, 5.3 6.0

Go COUGS!!! WSU that is! That's my alma.

Just out of curiousity, I already have my bed line-x'd. Can you add the line-x to the rails after thats already been done?