supersub

SOLD

Only one set left

As you pull the headlight switch out, keeping the outer facing you it will be the upper left on the plug on the back side. brown w/ white stripe it should be. I used a scotch block tapping into it.

Hp is addictive, so I would go AFR's to help solidify and future proof your build. Mo money up front means less waisted money in the end.

See first post, Revised I have three (3) Sets left,and i miscalculated on the hardware and do not have enough to finish. Easily obtainable on your own. I have reduced the price to 260.00 ea set shipped for the last three sets. Thanks guy's.

Lol! It comes and goes.

Hey Guy's I understand the cost is an issue. I hope you can understand the cost that went into making these: I decided to make a bracket specificly for the 15" Rotor that I found to work best for these New "slick & sick" vette Calipers. In order to do it right I hired A professional machine shop,using a professional machinist to come up with this bracket,several prototypes were created,fitted,then a final piece was produced.then I had to produce a minimum just to keep the price within reality. Unfortunatly the price you pay includeds all the things listed above,their time,materials used,anodizing,hardware,shipping and paypal fees. after all is done I will be lucky to get a 7% return on my money over and above everything else. So that being said, I guess i am not in it for the money,I am just sharing my efforts with those who wish to have what i have. A better truck.

Regaurdless which bracket you use it's the end result that matters, We created a great option for our trucks. And i mean "we" as in Us!The guy's doing it! It does not matter which brackets you get,I am willing to help you make it happen. I have done both, So let me know if I can help. Ray

Since this is up I will add some new stuff. Thanks Guy's Idle clip 12 second pass, mind you that this was its Second pass with the new set up Drove it 100miles one way,pulled two runs first hitting 14 spinning,and the other locked in 4hi. Now that was on 12psi, in that 12 Second pass you can hear when it hit third gear,and right after hear the TQ converter lock up(Premature)It pulled the nose down,along with 5* of knock. Figuring Now we are at 15# with the tune cleaned up, It Should hit 11's pretty easy.

LMFAO! Choking on my drink lol! WOW! I even remember saying that way back when. Now realizing that added displacement, along with positive displacement makes for an interesting ride. Nice find.

3 sets left

Nope. Only one.

very nice,very clean! I likee!

brand new in the box ready to ship..... 250.00 + shipping. Brand new in the boxes Corsa touring muffler,measurments are Approx 34"L x12"W with single 3"in and 3" out: $250 + Shipping Brand New Twin 4" pro side exit tips 150.00 + shipping Plus bag of 4 stainless 3" band clamps these are the heavy guage(@1/8)thick 1 1/4" wide clamps 25.00 shipped(gm sells em for 18.00 bucks ea.)

Can't agree more!

Very! $$$

And Why are you not going??

count me in! lol! I wish! sounds fun.

6-disc was an option,some may have came without the 6-disc option,and i believe all came with bose.

You need to look for offsets with an offset of +20mm and greater these will clear the front calipers. And yes plans for a 6-piston bracket was in the works but funds have run dry. But that does not take the idea of the table it just delay's the idea. I assure all the measurments have been done,just need to produce them. On off's are quite expensive.

@1500.00

Part of Part/time lol!

for those seriously interested,I am local and willing to help out to help sell it.

Thats a good thing considering you are sitting in one of those seats on this bus! Lol!

yes i do! pm sent. thanks