supersub

Well i feel it has come to an end. For those of you that have this set up on your trucks already know. Spread the word!. Now only fourteen people will have this set-up on their trucks,and suv's. Several of them are currently out and about. Some installed, and some waitng to install them. This has been shown to be an affordable "Big Brake" build as you buy set-up. I was one of the first of them to install these calipers on our trucks,pushed thru some hurdles and well....Let's just say I was the First to use 15" Rotors with the Zo6 6-piston calipers.I ended up producing my own brackets for these 15 Rotor's. A few others inquired upon this and wished to have the same. I have made a total of Fourteen Pair several have been sold already. Some are already driving on them,and so far very pleased with there individual outcomes. Others are still building there sets. Who will complete the finel few sets? The "LUCKY FEW" I would like to say! The brackets are solid billit cnc'd aluminum,hard anodized black. Hardware is included and are designed to fit our trucks with the 15" Rotors ONLY. They are for the front only. they allow the maximum amount of pad contact without grinding anything and most of all not rubbing on anything. They are a direct bolt on for STOCK Spindles. Mods will be needed for A/M Spindles.(Some have done this already) The Calipers can be had on ebay for some times a very great deal. Brake pads will need to be purchased,sometimes come with the calipers,which make it a great deal. Banjo bolts,and crush washers from the Z06 Calipers are also needed,and avail from your local gm dealer. (hurry they may be going out of business)lol! Most have also installed Stainless Brake lines also. As for the Rotors, They are 15" "Big boys" they are from a well known manufacture,those that have them know how bad ass they are! they will be available,well for as long as that Large Reputable Manufacture stay's in business.(lifetime) Once the remaining brackets are sold,those who bought them will recieve the info needed to obtain those 15" rotors at there best possible pricing. You will not be required to buy them from me,you can call your local speed shop, or who ever can get you the best deal. The great thing about this is the ones who have them will be the ONLY one's who have them! How great is that! I Have miscalculated on hardware and do not have enough to finish the last three sets, easily obtained on your own. ******Reduced price****** 260.00 shipped. I have (3) three sets left, missing hardware *****Reduced Price***** For those that want them for there NNBS i can mill them down for the proper fitment. 15" Rotors are also avail for the them as well. once there gone, there GONE. For those wishing to install matching rear calipers, at this time you will need to get them from the other person making similiar brackets for these calipers. I am sorry but i have invested to much time and especially too much money. Ray " LUCKY FOURTEEN"

Baada Bing! bout time twice now.lol!

my thoughts as well, the hood was different,and what about the tips gibson super truck style? did it exit out the back? could not tell. would like to see some pic's of the whole truck. wish mine idle'd like that! Lol!

I think it is just a sticker, At least the ones At SEMA were.Same 5.4 but with a small eaton blower.

The material used to make these cladding pieces are "TPO",For that it does have what you would call memory. Heat it up with a heat gun,it will fall back into shape @ 90-95%,then once in place do a raped cool down.it will hold,repeat several times.some cosmetic repair may be needed. the floor awieght idea is a good one,just add heat,then cold. I bought one of those pieces he is selling,they are fugged UP! lucky i only need to cut the end off. these seem to be factory run offs,discards do to LARGE face SCARS.

innovators west also. Great products,pm leftcoast32 he is a dealer for them.tell him i sent ya!

I have heard the ceramic pads are best for low dusting...

Hope everything works out. I have allstate and when it was time to pay out,well lets say they are still working on it. be ready to call the dept of commerce and file a written complaint if things get out of hand. Ray

By molding it do you mean making it permanent? I would rather see you make it look like cladding. Like the rest of them.

Yep! Brackets and 15" Rotors are avail for the NNBS As well.

NBS is covered! 99-06/07 And NNBS 07 up! Front 15" Rotor's with the use of the C6 calipers.

Now add the LUX amp and it will really come to life!

creativity is the key, And i like it. FYI Guy's mine was constructed from a 2003-2006 denali console. Appologies for the highjack.Lol!

its reall not that bad of a location,I would consider rasing it like you were thinking and it would be a little easier to see. Mine are really easy to see.plus i like the hide factor.

Just got mine back from my painter. SMOKED Def the way to go IMHO

Good luck to ya mike. Wish you the BEST! Ray

so far so good its -10 here. MN "dont u no"

I am local and up for some possible dealing.Pm me where to start. I have everything to put it back stock.

Yeah, And I have not even hit it hard yet! Would love to nail it from a dig like we did in (Brad's)shadowsnipers truck,with whats in front of mine just to feel all that power! I AM CHICKEN! lol! think this 4l85 could handle that?

Still dont think it is quite enough. 720hp Fly or to the wheels. good price though if no core charge. def a thought.

welcome! Your stepdad sure sounds cool, Sorry for your loss.this site has some great stuff so stick around.

Yeah he is allright! great to deal with.Allways comes thru. Stew Ray

thats the way to do it!

Yeah! I think the same thing... it would be funny watching there reactions once it the traps. Pass time Ftw!