Porno Joe

could you get me a pic of it? i know some pretty good wheel guys.

yup still for sale

what happened to the forth wheel? i really wanted a set of regency wheels

considering selling this, only because I never drive my truck so this really doesnt do me much good sitting under a car cover. it is trimmed to fit the brake duct tighter. How bout 120 shipped OBO or throw a trade up if you have one. anything SS related and also a TBSS intake

actually flamethrower kits are almost the exact opposite of ricer. its a hot rod thing. but like I already said- you cant use a "typical" kit with cats and i dont think with fuel injection either. This is a carb thing because you shut the spark off and let the gas pump thru the engine and out the pipe. I cant find any links online about the propane stuff, but that is pretty cool but also a little more dangerous because you have to carry around a propane tank on your truck. I love my flamethrowers on my 67, i posted a pic in the video and pic section. would I put them on my SS? No but thats just not the theme Im going for with my truck, but hell i say do it man, that isnt no luxury truck, its just a chevy.

any interest in sellin the wheels?

Where are you located at? would be great if you would close to pittsburgh pa

Did a couple photoshoots. Here is a pic from the shoot with my truck, only one i have at the moment: And this is one was shot in one of my garages. not my truck, but its cool. truck is an old Mack firetruck that has been cut up on a custom built frame:

cant put a flamethrower kit on a truck with cats- well not the tyical kits out there. Ive seen them done where people shoot propane out the pipes, but thats a lot of work

ok if it doesnt sell ill take it for 25

I'll give you 10 bucks for the tan console pieces

want to put my drop keys in, but no one seems to have the tool for me to rent locally. Anyone got one i can rent or buy?

if its normal Ill accept it as it is, but is it normal for them to be so dim u cant see? I know some warm up is needed, but this seems extreme. Can I switch the ballasts from the hi's to the low's to check?

I did the 4 hi mod and it makes it better, but yeah Im thinkin these high beam ballasts were DOA. i ordered hi's and low's (my dad and I both have an SS). dad already had lows, they worked well, I put my lows in, they work well, I put his in, when you first put on the highs without the 4 hi mod, u cant see anything

well this is a brand new kit, just installed saturday. BOTH lights are so dim you cant even tell they are on when you first switch

When you first switch from lows to his, are you lights practically off they are so dim? I know HIDs need to warm up, but this seems a bit extreme to me. Also, as its warming up, the one headlight will flicker a bit. takes about ten seconds or so til the lights are on fully is this normal?

well 5 feet in the general rule. if you look at the numbers you posted, the rooms should be 4.5- 5.5 ft longer than your playing area, depending on cue size. 4.5 on the side for a 4 ft cue given the size of the room you gave, you should prolly have a 7x3'6" mainly because of how narrow the room is. most ppl dont use a 4 ft cue, pretty sure 57 is the standard length and at that your room is still 6 inches narrower than ideal. if you go any bigger than that you are going be playing with short cues which i personally do not like

i just put a pool table in my garage. got a nice 1960 brunswick out of a basement. i tore it apart and put it back together myself, even felted it and all. its really not that hard to do. i think the general rule for rooms with a table is you should have 5 feet around all sides of the table

well not out... got 8000k lows, and one drive the drivers light was out. then it came back on, now it looks like its whiter than the pass light. does this mean its going bad? is it the bulb or the ballast? where would I get one? thanks!

would that engine cover fit a silverado?

Yup same thing happened to my truck with only 17k on the clock. its the handle. i got mine replaced under warranty, but it shouldnt really be too hard to get a good one out of a junk yard and paint it if you need to

I already have the mcgaughys 2/4 kit on my truck with spindles and hangers and shackles. I just bought a set of keys to drop the front some more, my question is what do i need to do with the back? Thanks!

whats with all the people dying young? DRUGS pretty sure i just heard on the radio that he overdosed

I plan to let it do this all year while i build my S-10:

normally i do my own paint, but this time since its black i did all the prep and let my buddy who owns a body shop spray it in his paint booth. As far as cracking, im fairly certain the new brackets we designed should keep this thing from moving at all. i used the screw holes BSER put in the top but instead of 2 bolts thru the bed, I redesigned it so there are now 8 bolts.