Cramer

Grizz Mint Bizzches...

I believe that a 16" wheel is the smallest wheel you can get on the rear. Not 100% sure on the RWD trucks. But if I remember correctly not all of the 16" wheels will fit either. Those do look nasty.

I honestly think that Mizzou is a title team. I can't wait to see them play this weekend. They might shuffle some more rankings around. This will be the best CFB weekend in recent memory with the games being played. Sent from my Motorola RAZR MAXX using Tapatalk 2

Ok so everyone knows or thinks OSU had a gravy schedule, and looks like FSU did too. But the SEC nut huggers are claiming that Bama and Auburn are leagues above all other teams. I have been a Auburn fan since Bo Jackson BUT my love is with OSU. I don't see how Auburn gets lucky in two games and one being the #25 team (should have lost) and the Bama game (should have lost) and now they should be title contenders. OSU just barely won against Michigan in a HUGE rivalry game at the BIG HOUSE when Michigan played their very best with good players on the roster. All the other "easy" games OSU played a majority of the second half was played with their #2-#3 players. Bama didn't play how they can and that proved to be a loss to Auburn. You have to win to win it all. I really hope that OSU puts a hurting on MSU this weekend and follows up on FSU just to put the crying babies to sleep. Only time will tell, and that time will be soon.

Welcome from Ohio. Sent from my Motorola RAZR MAXX using Tapatalk 2

Prediction. 1- FSU 2-Auburn 3- Bama 4-OSU Sent from my Motorola RAZR MAXX using Tapatalk 2

BTR SLR lifters FTW. Sent from my Motorola RAZR MAXX using Tapatalk 2

I bet the fit of mine is better then a Corsa on my header back. I fabbed every part from my collectors all the way to my tip. Other than my Borla and mandrel bends, and my v-bands. All TIG welded stainless fit like a glove and no leaks. Btw I have fixed and diagnosed problems that certified techs "fixed" or couldn't diagnose because the computer told them it could be 1of 5 things. I know more competent non certified mechanics with more all around knowledge of repair and diagnostics than I do of those who are certified. Sent from my Motorola RAZR MAXX using Tapatalk 2

Return the heads and get a set of 6 bolt LS7 heads if your planning on going that big. You have a block for the foundation, but everything else is in the air. What are you going to do with it? Keeping it NA, or FI? If your planning your build, start with a plan and stick to it. Cam, compression, and heads will be the top priority with blueprinting and on what parts you need. Talk to a good engine builder who is familiar with LS motors (Kurt Urban, Lingenfelter etc) and get an idea. Then talk to another good one and see what the two have in common on what should be done. Don't throw parts at it and hope it runs like you want it to. Big CI motor will require a lot of good parts and money and one part that is skimped on can take out all the good parts.

I need time too. I don't have any more covers or time. When I do get time I will make more and use my time.

Do you have a aftermarket head unit or a remote start/alarm on the truck? My remote start/alarm's bypass unit shorted out and caused the same problem you have. I did the draw tests and everything was fine. Finally narrowed it down to the RS/A unit and got the culprit. It honestly took me a few months to figure it out.

I actually designed the banner, then had a place make it. Little work and creativity and it's printed. It should be here tomm.

-_- Sent from my Motorola RAZR MAXX using Tapatalk 2

Who said this is a big cam? Unless I am reading wrong its only a 223 duration cam, yes it does have some lift to it but nothing terrible. That converter should be a fun time in it and still have good manners all around. Prob won't hit your goal of 500 without some supporting mods, but it will be fun. Sent from my Motorola RAZR MAXX using Tapatalk 2

Cut the flange off and weld on some v-bands. Problem solved and will last a long long time.

Shake up in the top 10 this week.... Go bucks! Sent from my Motorola RAZR MAXX using Tapatalk 2

The other side. Lol. And a bad piece of cladding. Haha. Sent from my Motorola RAZR MAXX using Tapatalk 2

Yeah they have been blacked out for over a year I think. I still have the 22" chrome reps but they are sold and waiting for the guy to pick them up. This should be bad ass, might have to make some more too. Sent from my Motorola RAZR MAXX using Tapatalk 2

Well I am in the process of building my garage. Since I plan ahead way to far, I decided to have a custom banner made for my welcoming to MY GARAGE. The garage is in the forming of the foundation stage, but i'm excited to have my own place to play now. I should have taken a better picture of the truck to begin with but it is what it is. BTW it is 3'x5' vinyl.

I don't really understand what was done. If it had bad cats, then they would have to be removed or replaced with new cats. If the cats were gutted or removed and the guy tuned out the rear (downstream) sensors then you should be good to go if the scan shows all the system readiness tests are OK. The downstream sensors are basically a secondary meter that gauges the emissions that have passed through the converter. Sent from my Motorola RAZR MAXX using Tapatalk 2

Omg! Awesome and holy shit are all I can think of. I had plans on doing mine similar to some of the stuff you did. Might be having a conversation with some questions. Love it man! Sent from my Motorola RAZR MAXX using Tapatalk 2

MSU Sent from my Motorola RAZR MAXX using Tapatalk 2

It would help to know why you want to run an adjustable FPR. I can't see your mods on my phone so don't take it wrong. Sent from my Motorola RAZR MAXX using Tapatalk 2

Little update on the how-to. I went out and did the process with pics. Then when I went to do the pressures with my new spring pressure tester, I got some scary low numbers. They were about 10# off my previously measures seat pressure, and 40# off my open pressure. I came to the conclusion that my gauge needs calibrated, so I have to order a calibration spring for it. I have basically everything else done but will wait to do it all till I get the gauge calibrated.

Nice bump stick! Sent from my Motorola RAZR MAXX using Tapatalk 2