ccgoodwrench

These are in great condition

Silver

I have 4 original silver wheels with with original tires they have 35,000 miles on them. $600.00, south jersey area

Thanks again so far I droped two degrees of timing in the g/ cy 64 and up 2400 RPM's and up I do run a conservitve tune so 'll try the br6ef plugs and a 50 shot and see what it's like, then probably run a stand alone system, and I can't remember what disc I have in my convertor it is a vigilante 2800 and I run o* torque management at the track in performance mode

I think that is possible cause I had a p-30 chassis truck and was having driveline vibrations and I adjusted the cross member to center the tail shaft of the transmission between the frame rails and the vibration was gone, I know the is a different type of chassis but it work for me.

Is their a APP for silveradoss.com? trying to reinstall it on my I-pad, the one I had solmething wrong with the I-con when I rebooted the I-pad

Awesome show for sure, seen a SS with black wheels and the pass. side door cladding mission,at the venders section, had a good time and a lot chevelle's

Going to check this out maybe see some of you their, my SS will be the one without a tailgate,rear bumper,and no passager side cladding,

Looks like 3 votes for the 15th and 3 votes for the 28th, how about both dates?

Thanks and I'm going No higher than a 75 shot for now just don't know if the tranny will take it. It only has a 2800 stall converter and a shiftkit and bm oil cooler

I just got a set of TR6's and I thought they were non extended tip, but to me they look extended, I do have a set of BR6EF's with about 200 miles on them, I took them out and put the stock plugs back in, it was 6 months ago.to see if it would stop a misfire code P0300, but I think it was my tune, I dialed in the MAF sensor and truck has much better throttle response, it wasn't enough to set a hard code just immature in the scanner, I haven't check for the code yet I just disabled P0300. I have a nitrious outlet system with a trick flow controller and a WOT switch and a low fuel pressure switch to turn off nitrious if low fuel pressure, using stock fuel system and 44# injectors

What area's do I need to subtract timing at, 0.68 g/cyl and up and about what RPM's.on the timing tables? And anything else need to be done to the tune? Using HP tuners, starting out with 50 then 100 shot. And I tried to search and nothing came up.

Just got a set of TR6 plugs need to install, what weekend are you guys meeting up, Also I thought the TR6 plugs were NOT a extended reach, they look like they are a extended reach will they be good for a 50 shot and a 100 shot.

Nobody need's this,it is a updated one. I heard the originals were melting.

Do you have Manuel for the welder? and is that the max welding amps? or max input draw amps?

its looks like you will have to buy a plug to match that outlet it should work for you just get a three prong plug to match cause it doesn't seem to be wide enough. What is the amp rating on the mig welder?

Check you breakers at the main electrical panel for the dryer and is it a double breaker?and what amp rating

Closed on sundays, defently call, I think the lid was $100 also could be in a different sections, information or under hood decals

I have a blower resister kit for sale I believe it is for the auto climate controls, I didn't punch in my vin and got the wrong one. My truck has manuel controls. Just go to gmparstseast.com and use your vin and check to see if this is the right one for your truck, item no. 89019089 price is $40

Try gmpartseast.com I thought I seen the label listed for my truck, just punch in your vin and ervey part for your truck will be listed or try and call them 1-888-737-9766. I get all my parts from them they are about 30% cheaper than all dealers and they are gm parts and no tax just shipping. I look for your truck 05 2wdHD with 6.0LQ4, but I don't know the vin it shows the air box lid but not the label just give them a call they might be able to help Try gmpartseast.com I thought I seen the label listed for my truck, just punch in your vin and ervey part for your truck will be listed or try and call them 1-888-737-9766. I get all my parts from them they are about 30% cheaper than all dealers and they are gm parts and no tax just shipping. I look for your truck 05 2wdHD with 6.0LQ4, but I don't know the vin it shows the air box lid but not the label just give them a call they might be able to help

I would like to try out my nitrous setup I installed two years ago, weekend would be good for me,

Any updates yet?

When I bought a harness from gm for my electric engine cooling fans it had the fog light pigtails with it, my original harness didn't, I think some trucks didn't come with the fog light connectors. If you need them order a forward lamp harness for a 2007 1500. It was little bit pain to install but I needed for the fans to work. Hope this helps. Oh the harness was $125.00 5 years ago. But it was all plug and play,came with the connector to plug in the fuse box. It also looks like the rest of the wire is their to the cab, because I could see the terminals for the fog light relay in the under hood fuse box. Hope this helps

Sorry for posting in the radio section too, just wasn't sure what section to post this in.

Selling a Sirius radio system if anybody is interested? I had it for about 5 years,I installed it in the SS only used it a couple of times, complete with instructions and original box. $60.00+ shipping